• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for UPVC Window Repairs modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum and timber.

Regularly cleaning and lubricating upvc window repairs near me windows and doors is vital. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation you'll need to source some plastic spacers to help the new pane to fit properly into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall on the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap between the window repair and the door is substantial, you may prefer a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues like sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to access the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in position.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could also be caused by the handle mechanism wears out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's crucial to take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the problem the caulking that was used up may need to be removed before a fresh layer is applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in the breeze. These are easily replaced by any competent DIYer and can be done within a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change the hinges on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. This can often be resolved by sending us a picture on our website. We will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become disaligned as a result of wear, which can cause a gap where the sash meets frame. If they are damaged beyond repair, it might be required to realign them. The interlock may be unbalanced. This happens on the hinge side and might require to be cleaned. In some instances it is possible to replace them.

The seals may wear out or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the risk of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be put on the windowsill on top. These will help to keep cold air out and keep your home warm and cozy!

The windows made of upvc can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and they may reach a point where it is more economical to replace them than fix them. So, if you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.