• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However, if you have double-pane windows that are anchored by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, you will need to source some plastic spacers that will assist the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor, where they could be trampled.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap between the door and the window is significant, you may want to use an alarm system that has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues such as sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, shut your window and check for fit. If you're satisfied with the fit of your window repairs, tighten the screws to keep them in the right position.

If you aren't able to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it could also be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need close the window and perform an initial test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to take action if get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix and should be undertaken by any competent DIYer. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and can reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread across the home.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze It could be hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It is an easy process but it can be easier with someone else to assist in holding the frame up.

Verify that the upvc window repairs near me hinges open and close in the proper direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website will often solve the issue. We are more than happy to offer suggestions.

It is also crucial to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become misaligned due to wear, which can cause an opening where the sash and frame meet. If they are beyond repair, it might be necessary to have them realigned. The interlock may be disaligned. This happens on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace these.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to replace them than to repair them. If you encounter any issues with your upvc window you should consult an expert as soon as possible.