• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor, where they could be trampled under.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window repair is significant, you may need to consider a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of issues, including sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

Upvc window Repair handles may also become loose. Most often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close the window and then perform a test fit. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to act if you wake up every morning to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes are free of debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze It could be the hinges that are at the fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is an easy process but it can be easier to do when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window improperly or a faulty installation in the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to offer advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. If they are beyond repair, it may be necessary to get them re-aligned. The interlock may be unbalanced. This is located on the hinge side and might require to be cleaned. In some cases it is possible to replace them.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes filled with some type of filler. They can be positioned on the top of your windowsill. They will help block out cold air and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than fix them. If you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.