• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, you will need to locate some plastic spacers that will aid the new pane in being able to fit correctly into the window frame.

If you are going attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap between the window and the door is substantial, you may want to use an alarm system that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a variety of issues such as sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen up. Most often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the problem the old caulking may require removal before a fresh layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazed window repairs near me glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be hinges at fault. They can be repaired by any skilled DIYer and can be completed in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy process, but it's easier to do if you have someone to help you hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a photo via our website will often solve the issue. We are always happy to give suggestions.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be unbalanced due to wear, creating an opening where the sash and frame meet. This can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to get them aligned or replaced. In addition, the interlock could also become unbalanced. It is located on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping can help prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a little regular maintenance and repair your windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc you should consult an expert immediately.