• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is important to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the old frame very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that help the new pane to fit properly into the window frame.

If you are going to attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is large, you might want to consider using a security door upvc window repair that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they may be afflicted by a variety of issues like sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. It's crucial to act immediately if you discover that your upvc window repair windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit, tighten the screws until they remain in the right place.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it is important that you take action. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is an easy fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window repair. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open in a breeze, it may be hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part, hinges can be damaged over time. It's very simple to change the hinges on a window however it is easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become misaligned due to wear, creating an opening where the sash meets frame. If they are damaged beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it's feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a lifespan and they may reach an point at which it is more economical to replace them than repair them. So, if you are experiencing problems with your Upvc Window Repair windows, it is always recommended to seek help from a professional as soon as you can.