• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you're planning to try to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sliding. A sagging uPVC window can cause problems with light, draughts and even security. It is crucial to act immediately if you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you aren't able to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as soon as you can in order to keep your upvc window repair window waterproof and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have been removed over time, but it could be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. You'll first need to close the window and perform a test fitting. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls every time it rains it's important to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may have to be removed. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with ease, it may be hinges at the fault. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It's easy to change a window hinge but it's much easier if someone else helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should open.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to inadequate installation at the factory. This issue can be fixed by sending us a photo on our website. We will be pleased to offer you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. First, the hinges because of wear and tear, may become displaced, which causes an opening to appear between the sash and the frame. If they're beyond repair, it could be required to realign them. The interlock, which is located on the hinge side of the window, may also be misaligned, and again it is feasible to give them a clean but in some cases it might be necessary to have them replaced.

The second most frequent reason for draughts is window seals, these can become worn down or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.