• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it can be relatively simple to replace them, and the new window will usually fit inside the old frame very easily. However, if you have double-pane windows that are secured by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues such as sagging. A sagging uPVC window can cause problems with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll have to open the window to get to the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them and that the sill pan has been properly angled to drain away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely the problem is with the seal than the frame. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be hinges at the fault. They can be repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is an easy procedure, but it is easier with someone else to help hold the frame in place.

Check that the uPVC hinges open and close in the proper direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. This can often be resolved by sending us a photo through our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become misaligned due to wear, which can cause a gap between the frame and sash. If they are beyond repair, it may be necessary to have them realigned. Second, the interlock can also become disaligned. This is located on the hinge's side and could require to be cleaned. In some cases it might be necessary to replace the hinges.

The second most frequent cause of draughts is the window seals. They can become worn down or damaged over time and let air escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Replace the upvc window repairs near me windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be placed over your window sill. These will help to keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will continue to provide excellent insulation and security for your home. It is essential to remember that all windows eventually get worn out and it is more cost-effective to simply replace them instead of fixing them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional immediately.