• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If you have double pane windows that are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor, where they could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the distance between the door and the window is significant, you may want to use security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is essential to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism wearing out. Fortunately, it's easy to fix a loose uPVC window handle yourself. The first step is to close the window and perform an experiment to ensure that it fits. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Based on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be put on. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with a breeze, it may be the hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is an easy process, but it's easier to do if you have someone to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you advice.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc window repairs windows can be caused by a few various factors. First, the hinges because of wear and tear, could become misaligned. This can cause gaps to develop where the sash joins the frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it may be feasible to give them a clean but in certain cases, it may be necessary to have them replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it may be more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.