• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards will fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap between the door and the window is large, you might want to use security screens that includes windows. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. However, over time they may be afflicted by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. To do this, you'll need to open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window repair near me to test the fit after having moved your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. Often this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The corners of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking might need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes have no debris in them and that the sill pan is properly angled to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with the breeze. They can be replaced by any competent DIYer and are usually completed in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It's easy to change a window hinge however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. This can be done by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It also decreases the possibility of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also be misaligned due to wear, causing an opening where the sash meets frame. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. The interlock may also become disaligned. This happens on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace them.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and they may reach a point where it is more economical to replace them than fix them. If you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.