• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Why is My Car Ignition Locked (Www.Cheaperseeker.Com)?

There are many reasons why your ignition may be stuck. The key could be dirty or may have a damaged wafer in it. This can be fixed by sliding the key in and out of the cylinder multiple times.

The pins of the lock cylinder can also be stuck. You can tap the cylinder lightly using a small tack-hammer.

Check the Battery

If your car is in Park or neutral, but won't turn on when you insert the key into the ignition, it might be an issue with the shifter switch for the transmission. This can be easily repaired by moving the shifter up or down to put the car in the correct gear.

If the car doesn't turn, the issue could be related to the neutral safety cable, or the shifter in the transmission. A mechanic or an auto locksmith can easily fix these issues.

It is also possible that the ignition cylinder is worn out. Over time both the ignition and key may wear out, making them difficult to remove or insert. A lubricant, such as silicon lock lubricant, can solve this issue by allowing the silicon wafers to slide into place.

The key can become clogged by lint from your pockets as well as adhesive from tape that is used to keep packages in place. This prevents the key from sliding into the ignition. You can clean the key with a cloth or a cleaner like Triflow to fix this problem. You can also try a spare key to determine if the issue is the ignition or the key.

You could also tap the key using a small hammer when it's in the ignition. This will cause a small vibration that could be enough to loosen the ignition's wafers and allow them to slide in place. But, be cautious not to damage the key or the ignition cylinder.

If all of the above options fail, it's likely to call a locksmith or automotive mechanic to have it examined. The key could be damaged in the cylinder of ignition, or it might be time to replace it completely. If the problem is with the key, a locksmith will be able to create a new one for you. If the cylinder in the ignition is the issue then you'll have to bring the vehicle to a repair shop in order for it to be repaired. Luckily, these problems are usually very easy to solve.

Check the steering wheel

A steering wheel that is locked can cause the ignition to stop turning. This occurs when the driver accidentally engages it as they exit or enter the vehicle. It is usually caused by pulling on the wheel while supporting themselves against it with their hands. It can also happen when someone in the back seat is unable to stop it when they exit the car.

Luckily it's an easy fix that doesn't require a trip to locksmiths or mechanics. First, make sure the gear shift is in either Park or neutral. If it's not you can gently pull or push the gear shifter until it moves to one of these positions. You should also activate the handbrake or press the brake prior to turning the key.

If the wheel isn't locked an inspection of the steering column will tell whether the key has been engaged with the lock. A small "Lock' label is usually located in the lower area of the ignition circle. It is possible to disengage this by gently jiggling or pulling the key with moderate force. It is important to not apply too much pressure, as it could damage the key, or even damage a wafer inside the lock cylinder.

Another option is to use an additional key to determine if it can disengage the lock. This could mean that the original key has worn out and is no more able to engage the wafers that make up the lock cylinder. If this is the situation, a professional at Karl Chevrolet Webster City will be able to create an alternative key.

If the new key still isn't engaging, a quick spray of oil that penetrates can help. Apply a small amount around the ignition and the keyhole that you have inserted, and then gently tap or jiggle it until it begins to work. If this isn't working, you'll likely have to visit a specialist at your local dealership for cars. They will be able to provide you with a replacement key, and will also replace the ignition cylinder in the event that it is required.

Check the Key

It could be that your key has been damaged if it will not turn on. You can try taking off any foreign material on the key (lint and adhesive from packing tape, etc.). You could also try the key with rubbing alcohol or Goo Gone to see if it can help.

It's possible that the internal lock pins aren't moving correctly when you insert the key. If you have an extra key that you want to test, you can try placing it into the ignition and gently pulling it out. You should be in a position to feel and hear the pins move inside. If not, apply lubrication to the pins using powdered graphite. You can buy graphite in small tubes that can be squirted directly into the keyhole. This will help the pins slide into place as you insert the key and stop them from getting stuck.

It is possible that your key has damaged or worn out and is unable to engage with the pins in the ignition cylinder. This can cause the cylinder to stop to turn, which can prevent you from starting your car. In this situation, you'll need to bring your car to an auto repair shop or locksmith for assistance.

If you can turn your vehicle with a spare key, and you've cleared the issue with the steering wheel or battery, it could be that the ignition cylinder is worn out. It is possible to loosen the lock cylinder by using the blunt end of a screwdriver or handle of the hammer (not the head). A gentle tap on the cylinder will often free it, allowing you to turn your key and start your vehicle. If this does nothing then you'll need your lock cylinder changed by a mechanic.

Check the Ignition Socket

The ignition socket is where your key slides in and out of place when inserted. It could get blocked with dust, or simply wear and tear. You can squirt some silicon lock lubricant into the ignition.

You can also make use of a small hammer to very gently tap the inside of the cylinder for lost ignition key, to try to loosen or reset the pins that could be out of alignment. Be very cautious not to overdo this or you could cause significant damage to the ignition switch.

Before you attempt this, make sure the car's gearbox is in neutral or park. Many newer cars have an option to lock the steering wheel when it is not in park or neutral, which can prevent the key from turning into the ignition.

If you've done all of this but cannot get your key to rotate, it is likely that the ignition cylinder housing requires replacement. It is important to know that different vehicles will require different procedures when replacing the ignition cylinder.

Generally, this means removing the plastic cover that is over the steering column and ignition assembly. To remove it, you'll need adjust the tilt-wheel to its lowest position. Then unscrew any fasteners that are holding it in place.

Once the cover has been removed, you will need to remove the old ignition cylinder off the steering column. Then, you'll need to check the new ignition cylinder that you purchased with the one you removed to confirm that they are the same. Once this step is complete the new ignition cylinder can be installed in the same way that the old one was removed.

Sometimes, despite all of our best efforts, the ignition will be damaged and require replacement. If this happens, it's recommended to contact Tempe Locksmith Tempe Locksmith for assistance. A locksmith can assist you choose the right replacement and install it correctly to ensure that your vehicle will restart.