• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't decay or rust as aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need locate some plastic spacers that will help the new pane to fit properly into the frame of the window.

If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the distance between the window and the door is substantial, you may need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window to access the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC handle. You'll first need to close the window and do an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs near me glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with ease it could be hinges at fault. Any competent DIYer can replace hinges in just a few minutes.

Like any mechanical part, hinges can wear out over time. It is very easy to change the hinges on a window but it's much easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to provide advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges, also because of wear and tear, may become displaced, which causes gaps to develop between the sash and the frame. This can be easily repaired by giving them good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it may be possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The second most frequent reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be positioned on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing issues with your upvc window you should consult an expert immediately.