• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Secure your prized possessions from thieves by adding an immobiliser ghost. Our TASSA-verified system protects against hacking, key cloning, and also vehicle immobiliser bypass.

The system is hidden within the wiring loom in your vehicle, so it is completely inaccessible to anyone who is looking. It is created by generating a pin code push sequence that is pushed through buttons already on the steering wheel doors, door cards, and the center console.

No circuit cuts

A car is a precious item that takes many years of effort to get, which is why owners want to safeguard their vehicle against theft. Traditional security devices, like alarms or wheel locks, can be easily bypassed by thieves. A ghost immobiliser is a very effective and efficient solution that operates in silence and isn't identified by modern thieves.

Ghost immobilisers, also known as a hidden device, is a device that connects with your vehicle's data network CAN to disable the engine. It does this without key fobs or radio frequencies. It communicates with the ECU of your vehicle by using buttons on the dash, steering wheel and door panels. This creates an unique pincode only known by you. The code can be changed at any time, and can include up to 20 digits based on your preferences. It comes with an emergency code that you can use in the event that you forget your PIN.

The ghost immobiliser could also be used to block a relay box from transferring your car key's signal from within your home, which could open the doors and begin the vehicle. It also blocks high-tech methods to steal your vehicle, such as OBD port hacking. The device is small, weatherproof and hard to detect. It's also hard to hack.

The ghost immobiliser comes with a further benefit: it can be installed in your vehicle without leaving permanent marks. This makes it ideal for those who are planning to resell their car in the near future. It's also quicker and simpler to install than the factory-installed system.

The Autowatch Ghost Immobiliser Fitting Ghost is a revolutionary next-generation device that can stop theft of cars using contactless technology by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN code. This is a stealthy device that can be put in without wires being cut and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, preventing thieves bypassing it with a new key. This system has been TASSA-verified and is compatible with an International Security Register. Owners will be able to rest easy, knowing that their vehicle is secured from theft.

No RF scanning

You'll want to safeguard your vehicle from theft if you have spent an enormous amount of money and effort to customize it. Installing an immobiliser is among the most effective ways to avoid theft. It will stop your vehicle from starting until you input the unique code. Utilizing the buttons on your steering wheel as well as the dashboard, you can generate an apex of 20 digits long which is only accessible to you, making sure that only you can drive your vehicle. It is also possible to set up a service and valet mode that will allow you to start your car for a short period without entering the PIN. This will allow your technician to work on your vehicle without you being there. This is a fantastic feature for people who are looking to cut down on time and make their life easier.

A ghost immobiliser is a next-generation device that connects to your vehicles CAN data network and uses the buttons on the dashboard and steering wheel to program a personal PIN code. It is designed to blend in, as it does not emit any noise or light indicator. It can be put in anywhere on your vehicle, without impacting the appearance of your vehicle.

This stealthy device is approved by TASSA and can reduce your insurance costs. It has a tracking feature that will locate your vehicle, even if it's gone missing. This is useful if you have a costly or rare vehicle that you've spent many hours personalising.

The Autowatch Ghost can be used together with an iPhone application that allows you to start your car remotely in the event you have forgotten your PIN or are not able to enter the vehicle for some reason. This feature is perfect for those who need to go on errands or drop off your kids, but do not want to risk having someone else drive your vehicle. This feature is helpful if you have to take your car to a mechanic to be repaired or serviced.

The Ghost has the advantage that it does not transmit or detect radio frequency which means it's not detected by thieves who employ RF scanning and code grabbing techniques. It also has the ability to protect your car from key cloning and ECU swapping which are the most typical methods of theft from cars.

No key cloning

Ghost immobilisers are a great option to protect high-end automobiles and are designed to block key replication. They prevent your vehicle from starting unless a PIN code is entered along with the regular key fob. This makes it difficult for thieves to steal your vehicle and could discourage them from attempting it initially. This is a great idea if you've spent a lot of time and Autowatch Ghost Immobiliser Fitting money making your vehicle unique or own a unique or expensive model.

These immobilisers are connected to the vehicle's CAN data network and are completely concealed, meaning that their presence isn't evident. It is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a thief must spend a lot more time in order to successfully steal your vehicle.

To bypass the system a thief must be aware of the unique pin code and the location of the Ghost. The pin code is unique to you and can change it as often as you need to. The pin you select is simple to remember, but mathematically difficult for anyone else to figure out. The engineer will also provide an emergency pin code in case you forget your pin.

The Ghost CAN Bus immobiliser can be easily installed anywhere on your vehicle. It works with any vehicle and can be completely customizable to match your car's look. It is also very easy to use and cost-effective. The device can be transferred to a different vehicle, as long as it is compatible with the new vehicle.

The immobiliser for the CAN bus is compatible with many other security features. It can, for example detect damage to the vehicle and alert the owner. It will also shut off the engine if it senses that the car has been damaged. The system will protect your vehicle against hacking and key duplicate. It also detects vibrations and contact with the vehicle. Additionally, it will warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, deactivate your key fob, and make new keys. This technology is a step up over the methods that were employed by thieves to steal vehicles in the past. The CAN data network also means that the system will not be affected by disconnecting or changing your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking and theft of replica cars. It doesn't use LED indicators or key-fobs. Instead, it relies on the buttons on your steering wheel, console, and door panels.

Modern thieves employ diagnostics to detect circuit cuts in your vehicle. They are able to bypass immobilisers that require a lot of wiring or are incorporated into the wiring. The Ghost is weatherproof, doesn't need any additional wiring and isn't detected by diagnostic tools of a professional. It can be used on vehicles equipped with anti-theft systems.

Another advantage of the ghost immobiliser near me immobiliser is that your vehicle can only be started by a person who has access to the PIN number and has physical access to your vehicle. This is a major advantage over traditional security systems which can be bypassed by simple cable tampering or a screwdriver.

You can easily reset your PIN in case you forget it using the emergency PIN override feature on your mobile or computer. This is useful if you want to start your vehicle after leaving it in a garage, or by using a valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It comes with the QR fingerprint system to identify parts that are not in use that allow for the return of stolen items in the event that they are discovered. It can also be turned into a service mode', which allows the engine to be started when your vehicle is parked in a garage or with valet parking but you will need to enter your PIN code once more to exit the vehicle.