• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they do not get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to make sure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If windows with double panes are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor which could cause them to be trampled under.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional comes out and fix the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap between the window and the door is substantial, you may prefer security screens that has a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues that include sliding. A sagging uPVC window repair near me can cause issues with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges can aid in fixing a window that is sagging. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen. Often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform a test fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is essential to act if you awake each day to discover mouldy walls and wet floors. The leaks of water from windows do not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in an ease. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler when you have a person to help you hold the frame in place.

Check that the uPVC hinges open and close in the right direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a certain way or due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. If they are beyond repair, it could be necessary to have them realigned. The interlock, which is located on the hinge side of the window, may also become misaligned, again it may be feasible to give them a clean but in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the risk of draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be put on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs, your upvc windows will provide excellent insulation and security for your home. However, it is important to recognize that all windows have a lifespan and they may reach a point where it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.