• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and fix the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sliding. A sagging upvc window repairs window can cause issues with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be completed by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may require removal before a fresh layer can be applied. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to remember that if the leakage originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens with the breeze. They can be easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Like all mechanical parts hinges will wear out over time. It is an easy procedure, but it is simpler when you have a person to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or due to improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your upvc Window Repair windows.

5. Draughts

Draughts can be caused by different things. First, the hinges because of wear and tear, could become misaligned. This will cause gaps to develop between the sash and the frame. This can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it might be necessary to get them aligned or replaced. In addition, the interlock could be misaligned. It is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace these.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and will lessen the risk of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to realize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as possible.