• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to help the new pane fit into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will keep water and drafts from entering your property until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders to gain access into your home. If the gap is large, you may think about an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sagging. A sagging uPVC window could cause issues with light, draughts and even security. It is crucial to act when you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're happy with the fit, you can tighten the screws until they stay in position.

If you are unable to reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is crucial to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you awake each day to discover mouldy walls and wet floors. Water leaks from windows not only lead to the destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window repair. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal than the frame. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and upvc Window repairs restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with an ease. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier to do with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide assistance.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become unbalanced due to wear, creating an opening where the sash and frame meet. If they're beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could be disaligned. This happens on the hinge side and might require to be cleaned. In some instances it is possible to replace the hinges.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

Lastly, one of the most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric that are filled with some type of filler. They can be placed on the windowsill on top. They will help block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and eventually, they will reach an point at which it is more cost-effective to replace them rather than repair them. If you have any problems with your window made of upvc you should consult a professional as soon as possible.