• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood woodburning stoves for sale are a warm way to heat a space and conserve energy. They will require some maintenance.

Many modern wood stoves comply with EPA emission guidelines. You can check for an EPA sticker on the grate or beneath it to ensure your stove isn't releasing harmful pollutants.

How to Start a Wood Fire

The smell and the sound of a fire can be an excellent addition to any home. However, it is important to know the correct method to make a fire on your stove. Incorrect methods can result in the fire not burning effectively and can cause creosote or smoke. These tips will help you start the fire that will warm your home with the least effort and with the highest safety.

Check the condition of your logs and coals before you begin a fire. If they are wet they will choke the flame and stop it from burning efficiently. You may also want to open the flue to let out any ash that has fallen into the stove.

Begin by putting a handful of small dry pieces of newspaper into your stove. This will help spark the tinder and ignite your kindling. Once they start to burn, add another layer of larger pieces of kindling to the top of the pile. This should be done using an arc pattern so that there is air between each piece.

If you own a wood coal stove for sale stove with an automatic control for combustion that will automatically deliver a controlled stream of air to the fire as it builds. This will help the fire to burn at a consistent pace without having to open the stove door to keep it in check.

It's important to avoid using too much tinder, since it can cause the fire burning at an excessive rate and doesn't use the fuel as efficiently as possible. When you have a good pile of tinder and some kindling in your stove, you can start the main fire by laying two large base logs on the grill. Next, place a layer of smaller logs parallel to these and on the top of the base logs. This method of creating a fire called a "top-down" fire will result in a powerful and long-lasting fire that will not engulf the larger base logs.

When your fire is established, close the damper and ensure it stays closed. Doing this too soon can cause the fire be smothered, and it will not allow for proper air flow, which can decrease the efficiency of the fire.

Adding Wood

Stoves can be used to heat your home efficiently and save you money. They can be used alone or together with central heating or furnace system to provide the additional heat needed in large homes or houses with a lot of rooms. Many of the new stoves that burn cleanly available use advanced combustion technology that can separate the burning volatile substances from combustible gasses as well as tar. This is done by supplying air at two different stages. The first stage is to aid in the vaporization process, and the second step is to supply fresh air that is pre-heated. This improves combustion and decreases smells.

The amount of heat you can get from your stove will depend on both the species of wood and the amount of moisture as well as the size of the logs. The logs should be stacked in a well-ventilated area for several months prior to when you try to burn them to give the wood time to dry out. If the logs are too wet they will release a lot of steam that is basically wasted energy.

You should add wood to the pile in intervals and not all at all at. Addition of too much wood all at once can cause the temperature to rise within the firebox, causing a vortex which pulls smoke and volatile compounds that have not been burned back into the flames. This could decrease the efficiency of your stove.

Avoid the use of any other combustibles, such as paper or cardboard in your stove, as they are not wood and have very different physical properties that cannot be burned without causing dangerously high temperatures and a lot of emissions. You should not burn combustibles that are compressed, such as wood briquettes as they differ in physical and chemical composition from firewood. They are also not approved by the type to be burned in wood burning stoves.

It is crucial that a professional install and test your wood stove. A certified WETT technician will test the installation for safe operation and safety, and also ensure that your chimney is operating properly. They provide maintenance services for your stove and chimney to ensure they remain in top condition. They can check the areas accessible to your chimney for leaks, and fix any issues found. They will also ensure that all house occupants know and follow the evacuation procedures for fire in case in the event of an emergency.

Adjusting the Damper

A damper regulates the amount of heat that is lost through the chimney when you aren't cooking on your stove. It can also be used to regulate the flame. If the flue is open but the damper is not closed the fire will not burn properly and smoke will erupt into your home. To ensure you have the most efficient fire, with the damper properly adjusted, you have to experiment with different locations and observe how each one affects the flames.

Typically, you'll want to keep the damper open enough to let air in and out of the flue while the fire is burning. This lets the fire get a good fire going and also helps keep it in good shape so that you can enjoy it for hours. The right opening will also keep the fire from being starved of air and prevent it from blowing smoke.

To be able to adjust your damper, you have to first make sure the fireplace is heated and the wood stove is hot. This will ensure that the chimney stays warm and has good draft. Once this is accomplished the damper on the wood stove can be adjusted.

Once the fire has burned for a while, you can reduce the damper to around three-quarters of its original position. This will stop warm air from the room from venturing into the chimney, but still allowing smoke to escape.

This is the best way to keep your fire burning and to prevent it from becoming too hot. The draft might be stopped if one closes the damper too far however a cold breeze can enter your home when the damper is left open.

You can test how much the damper is open by holding your hand near the top of the inside of the flue pipe. If you feel a small woodburning stove draft pushing against your hand, stove wood burning it's probably in the open position.

The damper settings can differ slightly from one stove to the next, and even between different types of wood. Experimenting with the various settings will give you an idea of what to look for, but you will need to adjust it until you find the ideal setting for your stove.

Clean Up

After the fire, it's important to clean the stove and flue. This will reduce the risk of a chimney fire, which is the main reason for wood stove-related fires in homes. Creosote is a sticky substance that can accumulate in the stovepipe, is very dangerous. It is caused by moisture and unburned wood particles that cannot escape the fire. It could also be caused by poorly lit fires.

Regular cleaning can help prevent creosote buildup. The best method to do this is to sweep the chimney each year. It is recommended to have your stove and fireplace professionally inspected and cleaned at least once a year as well.

It is also an excellent idea to clean out the Ash tray and grate frequently. It is best to burn only seasoned wood because it produces less creosote. Avoid burning paper, cardboard and plastic. They can release harmful chemicals for the respiratory tract and the air, and could be released into your home.

The glass in the wood burning Stove wood burning needs to be cleaned regularly too. Many modern wood stoves come with self-cleaning windows, so they do not require as much scrubs. If you're unable to get the glass on your wood stove as clean as you'd like There are stove glass cleaners that you can use on the window.

Other suggestions to maintain your wood stove include lowering the vent when you aren't using it, and slamming doors or windows to allow more airflow. This will keep the fire burning hotter, and more efficient. The wood stove will not have to work as hard in order to circulate air. It is recommended not to stack logs or leave them on the fire for an extended period of time. This could cause warping and splits. In addition, it is best to avoid using compressed combustible logs in your wood stove, because the paraffin they contain can melt and then flow into the flue which could cause damage.