• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

As time passes, the handles on your doors will wear down and need to be changed. When replacing them, it is important that the new handles conform to the critical dimensions of the old handle.

The three measurements to check are the top screw's location the lever and key hole dimensions. Use the size guide to help you.

Inline Lever/Lever

A lever handle is a modern door handle that is designed to fit new or replacement bi-fold doors handle. This style of handle is available in many designs and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite handles are made from robust materials, and are ideal for multi-point lock doors that require a strong design. The handles are inline and run from the same spindle and screw fixings. They are easily installed on doors made of uPVC/Composite, either new or old.

The handle can be adjusted and angled to fit any user. The handle has been tested to 200,000 cycles. This will ensure the quality of the finish as well as the performance of the handle over time. The sprung lever is adjustable to fit a broad range of locks. This is useful in doors that are narrower, where the cylinder is situated further away from the door. A shorter lever can be used for doors with latches that can be activated with the thumb on the inside.

Lever Pad

The lever pad upvc handle differs from the lever handles commonly found on doors. The handle can work off one single spindle (inline) or independently from each side by using two offset or inline spindles (pad). They are generally employed on UPVC double glazed door handle glazed doors and are available in a variety of variations and finishes.

The handles have been tested to the minimum of 200 000 cycles and are available in a variety of finishes, including White Silver, Chrome, & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad designs are supplied with a spindle and screws which allow them to be put on any new or existing uPVC conservatory door handles. The 211mm backplate fixing centres allow for a larger size handle that is often a benefit in replacing a defective or worn multi-point door lock mechanism. These levers for handles are also sprung, solving the problem of handles that slide from their horizontal position when they are not being used.

It is essential to match up the PZ dimensions of both the multipoint lock and the uPVC doors when choosing a replacement upvc door handle UPVC spindle and handle. This measurement can also be referred to as 'handle centres or cylinder centre'. It is important to match the right handles.

When you have the right PZ size you will then be required to make sure that the lever pads and push pads are of a appropriate shape to accommodate the American with Disabilities Act (ADA) approved handles you require for your doors. These are typically square or round with an internal lever, and an external push pad.

The majority of the UPVC Lever Pads that we offer are sprung. This means that they will return to a horizontal state when not in use instead of hanging and possibly securing to the frame. This stops draughts and cold air from entering a home. The majority of UPVC lever pad handles come in both left and right handed versions that allow them to be put on either side of the doors.

Euro Cylinder

Cylinder locks are commonly used on uPVC doors, but can also be found on other types of door. They work with a key to unlock a cylinder case that then reveals pins which can be aligned with the pins inside the lock body, allow them to rotate a revolving cam, thus opening the door. Euro cylinders can be fitted with up to six pins, with external and internal doors typically having different levels of security.

Choosing the right cylinder is crucial; it is dependent on how your door and handle are used. For instance, doors that are external must be secured with a higher security cylinder, whilst internal doors can be secured using an ordinary cylinder. Additionally, certain cylinders come with additional features that can improve security even more, like anti-drill or anti-bump properties.

A euro cylinder needs to be measured accurately to ensure it is the correct size for your door. The cylinder must be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn should there be one. It is recommended to do this while the lock is in place, but if this is not feasible, you can take it off and remove it to measure. A cylinder that extends beyond the handle and escutcheon could be vulnerable to attacks such as snapping locks, so it is essential that it's not too long.

The design of the latest cylinders includes anti-drilling and bump resistance features. These features are designed to minimize the chance of a attack by causing the cylinder to rotate in the opposite direction. This helps stop the attack and keep your doors safe.

Some cylinders are designed to withstand snapping. This is a common occurrence on cylinders. A special tool is used to break the break line of the lock and then the front of the cylinder is snapped off. This is a much faster and easier way to gain access than using the use of a multipoint locking system. It also leaves less evidence of the burglary which can make it difficult to prove insurance claims.

Spring Cassette

The spring cassette is positioned inside the base of your door handle replacements handle backplate, supplying a spring-loaded solution that returns your multipoint lock handles to their rest position after usage. The handles were previously equipped with no spring, and would slide when the locking mechanism was disconnected. Adding this simple component is one of the best methods to correct this, and is an excellent way to stop your doors made of upvc from becoming stuck in an open or closed position, as these aren't always simple to close manually.

These spring cassettes were created to be used with a sprung multipoint lock. They won't work with unsprung handles and you'll have to cut a hole into your backplate in order for them to fit. (Please check the image for a detailed diagram). They are a replacement for broken or missing cassettes within the backplate of the door handle for various kinds of uPVC doors. They have an elongated square that accommodates an 8mm spindle and are sold as a set.

These spring cassettes are a fantastic value for money solution to the issue of handles on your doors sliding. They are easy to fit and will extend the lifespan of your uPVC doors. For more information about our wide range of uPVC spares and accessories please feel free to get in contact with our team. We are always happy to provide expert advice and support you.