• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. However, if you have double pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth prior Repairs to uPVC Windows to when you begin working on the glass, so that any shards will fall on the fabric rather than on the floor, where they could be trampled on and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and repair the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you may be interested in the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of problems including sagging. A sagging uPVC window can cause issues with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sagging. You'll first need to open the windows so you can get at the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and verify the fitting. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close your window and do an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also hamper your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, old caulking may have to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This will only make your window more difficult to clean and lower its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open with ease It could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical part hinges are prone to be damaged over time. It is very easy to replace a hinge on a window however it is easier if someone else helps you hold the frame.

Verify that the uPVC hinges open and close in the right direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should open.

Faulty window hinges could be the result of incorrectly opening the window repair. in a particular manner or because of poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer advice.

It is also essential to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges can also become misaligned due to wear, which can cause gaps where the sash and frame meet. If they are beyond repair, it may be required to realign them. The interlock may be disaligned. This is located on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next most common reason for draughts are the window seals. These are prone to wear or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. It is important to remember that all windows eventually become worn out, and it is more cost-effective to replace them than to repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.