• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They do not get rotten or rusty like aluminum or timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. However, if you have double glazing window repair pane windows that are anchored by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this case, you will need to find some plastic spacers to help the new pane to fit perfectly into the window frame.

If you're planning to try to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional comes out to fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and Repairs to uPVC Windows doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems, including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll need to open the window so that you can get to the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit, Repairs to uPVC Windows you can tighten the screws to ensure that they remain in position.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and do an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the problem is with the seal rather than the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy process but it can be easier to do when you have a person to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be happy to give you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause an opening to appear where the sash joins the frame. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to have them re-aligned or replaced. The interlock may be disaligned. This is located on the hinge side and may need to be cleaned. In some cases it is possible to replace them.

The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is essential to remember that all windows will eventually become worn out, and it is cheaper to replace them than to repair them. If you are experiencing issues with your upvc window repairman it is recommended to speak with an expert as soon as possible.