• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance you'll need locate some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a variety of issues, including sliding. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and test it for an appropriate fit. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close the window and then perform an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the old caulking may need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is important to check that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze It could be hinges that are at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window however it is easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine which direction the window repair should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are more than happy to offer suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the possibility of a window sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become unbalanced due to wear, which can cause a gap where the sash and frame meet. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it could be necessary to get them realigned or replaced. In addition, the interlock could also become unbalanced. It is located on the hinge's side, and UPVC window repairs could require to be cleaned. In certain instances it is possible to replace these.

The next most common reason for draughts are the window seals. They are prone to wear or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and will reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs, your upvc windows will continue to provide excellent insulation and security for your home. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to replace them instead of fixing them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance immediately.