• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This will then authorize the start-up of your vehicle.

Simple PIN code change process

Many homeowners are upgrading their security because of the rise in vehicle theft. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your car. While a tracking device can help you find your car in the event of theft, it will not prevent the crime from occurring in the first place. Immobilisers, on the contrary, does exactly what it says on the tin: it shuts down your car's engine so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done using the indicator stalk, window or heater buttons. In addition option, there is an app for mobile devices that can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This feature is particularly useful if you need to give your car away to a valet service or parking because the immobiliser is activated, but not disabled.

The Ghost is a very unique and innovative device which is used in conjunction with the buttons on your vehicle rather than being a standalone device. This means that it is not only a highly effective protection against theft of your vehicle, but it can also be transferred over to any future cars you own, making it more investment-wise than a traditional steering wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is an advanced security system that protects your car from key cloning and hacking. It also stops ECU swapping. It's a weatherproof and small device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to ensure it works with all vehicles. It is also resistant against jamming devices which are a typical technique that car ghost immobiliser thieves use to get around immobilisers.

The advantage of using CAN data is that it operates in a silent manner in comparison to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons on your vehicle, like the steering wheel, centre console, or doors, to create an unique sequence of disarming. This sequence can be extended by 20 or more presses to provide additional security. The iPhone app allows only one connection, and comes with an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start if the correct PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service or for servicing without the need to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that connects to your vehicle's existing wiring and connects to your engine control unit (ECU). The device snoops on electronic signals to disable your car's system from running its normal initialization process until you enter an individual passcode. The system can be turned on and off by using your smartphone's application without the need for wires.

The standard factory immobilisers work by using a transponder, which is built into the key. This sends a message to the ECU. If the correct code is transmitted, the car will start however if the transponder is swapped with one from a different vehicle, the immobiliser cannot recognize it. This enables the vehicle to be started and stolen. The ghost immobiliser problems immobiliser was developed by an South African company at the top of security systems for vehicles technology. It safeguards your car from hacking, key cloning and even key theft. The only way a thief could steal your car is physically towing it away and even then, they wouldn't be allowed to drive it.

Ghost uses the buttons in your vehicle, including the indicator stalk as well as the steering wheel and door panels to create a unique PIN sequence that can be changed that must be entered before you can use your car. This is not required to use additional hardware, such as keys-fobs, and can last up to 20 presses long. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, which means thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that a system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks Ghost is hidden within the vehicle, so it cannot be removed or disabled by thieves. It's more difficult to remove than a car alarm that requires disarming with a button sequence. This makes it an excellent addition to an GPS tracking device that can be used to track your vehicle after it's been stolen.

Override of emergency PIN code

You do not have to look too far on social media to see stories or even videos of vehicles that have been taken by thieves using the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without your original key fobs.

The Ghost immobiliser helps combat this issue and offers an additional layer of protection to stop your vehicle from being taken if it is targeted by thieves. It creates an individual pin code push sequence using your existing buttons on the steering wheel, door panel and centre console. The unique pin code is entered along with your original key fob to stop the engine from getting started. The unique override pin can be found on a black card that you receive following your installation. It is simple to remember since there aren't any LED indicators.

The device is hidden within the vehicle's wiring and doesn't emit any radio signals, which means it isn't able to be recognized by thieves using diagnostic software that is able to identify the security system you have installed. This makes it a great alternative to the tracker.

Unlike most other security systems that use an engine relay bay, these CANBUS Immobilisers connect with the car's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely through a digital block of commands to both the ECU and ghost immobiliser problems the engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also fully service/valet mode compatible and are a great alternative to a tracker having your car in for repair at the dealers.

Service/Valet mode

In recent years there has been an increase in the number of vehicles being stolen with no owner's keys. With easy access to key cloning equipment & door lock pick sets, it is now much easier for thieves to take your prized possessions. To stop this, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your vehicle has been hijacked.

It communicates directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It is completely silent since it doesn't use radio frequencies or key fobs. This means it cannot be detected by diagnostics or any other car hacking devices. It also protects the user from using the new ECU or key to bypass the system because only the PIN number allows the engine to be started.

The device is hidden within your car and is reached via the buttons on your steering wheel, centre console, and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits must be entered before you are able to start your vehicle.

This is the very first aftermarket CAN bus immobiliser that has been developed. It will stop your vehicle from being started or driven if you don't enter a PIN code first. If you're driving away with the device arming the indicator will flash on your dashboard that will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN in this moment the indicator will continue to flash and will require a new pin code every time you attempt to start your vehicle.