• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

It is essential to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.

For fitting single pane windows, it is relatively easy to replace windows, and the new one is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled under.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door repair is significant, you may need to consider an alarm system that has windows. This will provide the best of both.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you might have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

It is a fairly easy fix that can be done by any DIY expert. Depending on how severe the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to note that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze It could be hinges at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It is essentially a simple process, but it's easier with someone else to help hold the frame in place.

Check that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause an opening to appear where the sash joins the frame. This can be easily repaired by giving them good cleaning, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window, may also be misaligned, and again it is feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The next common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.