• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and Upvc Window Repair not onto the floor which could cause them to be trampled.

It's a great idea to tape the gap once the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you are unable to reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. The majority of the time this is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

It is important to check that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass in your double glazed window repairs glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be the hinges that are at the fault. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window but it's much easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are happy to offer assistance.

It is also important to lubricate the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your Upvc Window Repair window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form between the sash and the frame. If they are damaged beyond repair, it could be required to realign them. The interlock may be unbalanced. This happens on the hinge's side, and might require to be cleaned. In some cases it is possible to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is important to remember that all windows will eventually become worn out, and it may be more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.