• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost Immobiliser

The autowatch ghost immobiliser is a cutting-edge security device that is simple to install. It safeguards against key cloning and car hacking as well as ECU swapping.

The Ghost Immobiliser communicates with your CAN bus network and locks the engine using a personalised PIN code. It is completely undetectable , and does not emit any sound or LED indicators.

It is simple to install

The Autowatch Ghost immobiliser, the most advanced vehicle security system available is the most effective. It is directly connected to the engine control unit via an CAN data bus which prevents key cloning or theft. It prevents thieves from changing your ECU to bypass it and generate a new key to get your car started.

The Autowatch Ghost is easy to fit into nearly any vehicle. It does not emit radio frequencies or LED lights to show its presence. It utilizes the CAN data network and responds to inputs made through existing buttons on the steering wheel or the dashboard or door panels.

The Ghost Immobiliser will be programmed to have an individual pin code once it is installed. The pin is created specifically for your vehicle and will only allow you to start your vehicle only if you enter it correctly.

It is simple to change your PIN code at anytime. Take note of your previous PIN and then remove it from your emergency PIN card. Follow the instructions to reset it.

Your engineer can create an emergency code to reset your PIN in case you forget it. This will be explained to the customer at the time of installation and will ensure that your vehicle remains protected in case you forget your PIN.

Ghost 2 is the newest TASSA approved product approved by TASSA. It has been tested and proved to stop key cloning and theft. It has met all the required security criteria and is now recognized by insurance companies as a legitimate form of security.

It is extremely difficult to duplicate keys, and thieves will not be able replace the ECU of your vehicle to start it up without entering your PIN code. This will safeguard your vehicle from spoofing and jamming devices trying to obtain codes from the remote fob.

The Ghost immobiliser ghost is very easy to set up. It only takes few minutes to complete the installation. Your engineer will run through the installation, demonstrating how it works . He will also provide you with owner manuals along with installation certificates and an Ghost 2 emergency card for you to take home.

It is simple to alter your PIN code

The Autowatch Ghost immobiliser, one of the most advanced security devices available, is designed to protect your car from key cloning or hacking. It makes use of the CAN Data Network to protect your vehicle without adding key fobs or cutting wires.

Once it's installed in your vehicle , it is easy to alter your PIN code at anytime. This can be done by using the buttons on your steering wheel or dashboard and you can make up to 20 digits PIN codes.

When you change your PIN the device will flash a couple of times to let you know that the process was successful. This process can be repeated as many times as you like until you get the right combination. There are a few things you should know prior to you can complete this process, for example, what buttons are available in your vehicle.

You can also use the service mode feature to allow you to start your vehicle and drive it around without having to enter the PIN code. If you aren't sure what is ghost immobiliser pin you want garages can service your vehicle without you having to know the pin code.

This product is distributed by Sussex Installations who are a TASSA Approved Installer, which means they are registered with TASSA the brand new organization that evaluates the security of vehicles and provides third party confidence in their installations that they have been carried out correctly and safely in line with the manufacturers installation instructions.

The ghost immobiliser birmingham is simple to put in. It's a next-generation device that doesn’t require cutting wires or putting in key fobs. It is directly connected to the CAN network of your vehicle. A unique PIN code can be entered by pressing the buttons on your vehicle's steering wheel and dashboard to prevent thieves from stealing your vehicle.

The Ghost is protected by a unique CAN data network connection. This means that modern thieves are unable to detect it using diagnostics to detect a circuit cut. It does not emit a radio frequency signals that could make it easy for them to find it. This keeps your vehicle safe and secure 24 hours a day, free from the risk of theft.

It can be mounted in any vehicle

Ghost Immobiliser is not like traditional key-cloning systems that rely on relay boxes to trick the vehicle into believing keys are present. The Ghost Immobiliser will not allow your car to start until the PIN code has been entered correctly. This means your car is protected from key-cloning, hacking and theft of keys without compromising the security of your vehicle, and preventing thieves from being able to make use of fake or stolen keys to unlock your car.

By using the buttons on your vehicle, like the ones on your steering wheel or dashboard, a personalised PIN code is created to safeguard your vehicle. It can be changed at anytime to create a unique PIN that is mathematically impossible to guess.

With the modern day car thefts taking place in seconds, it's essential to have a system in place that protects your vehicle from being stolen within the timeframe. The Autowatch Ghost Immobiliser is the next-generation vehicle security system that guards your vehicle from theft by limiting access to the engine until the PIN code is entered.

It can be put in nearly all vehicles, including motorhomes and vans, motorcycles , and plant machinery. It's also extremely small and weatherproof making it almost impossible for a thief to find.

The Ghost Immobiliser communicates with the ECU via the data bus to disable your vehicle, this means it cannot be bypassed or altered in any way. It has been extensively tested before it is released to the general public.

In the end, the Autowatch Ghost Immobiliser is extremely difficult to identify and can be reinstalled at any point if you move your home or switch cars, provided that the new car is compatible.

Another advantage of the Ghost Immobiliser is that it can be used in valet mode, which means that you can hand your vehicle over to a valet service provider or dealer without needing to hand them the keys. It also prevents any miscommunication between the dealer and their diagnostic equipment because it prohibits communication as part of its security features.

The Ghost II is also TASSA Approved, which makes it a very useful security feature that can reduce your insurance premiums. It is recognized by insurance companies as of 1st March 2020. It also has unique fingerprints that are placed on high-value components of the vehicle. This allows investigators to identify the owner quickly.

TASSA Approved

The autowatch ghost immobiliser is TASSA approved and offers the highest level of theft protection that is available. It has been designed to protect against most common forms car theft that involve keys. It is totally undetectable and does not require any key fobsor remotes or LED indicators that could indicate its location.

The device is compatible with all types of vehicles , and it works with the CAN bus network data network. It is simple to install and poses minimal chance of failure. It is weatherproof and does not use radio signals, which means it is difficult to detect.

It uses the original buttons on the vehicle to enter a PIN code that can be changed at any time. This makes it simple to modify and only you will be able to know the new code.

You can also create an emergency PIN that is specific to your ECU. This will prevent thieves from trying to duplicate your key or replacing it. You can alter this at anytime and set it up to 20 presses in length to make it harder for thieves to decipher.

autowatch ghost immobiliser (lovewiki.faith) can't let the engine to start unless you have entered the correct pin code. This is the only way to unlock your vehicle and prevents thieves from taking your vehicle without your consent.

This device also features the ability to use a service mode, which allows the vehicle to be temporarily started and drive without the requirement for a PIN code. This lets you remove your vehicle out of the garage and back on the road in a short time without having to worry about safety.

It is a CAN bus compatible system that communicates with your vehicle's ECU to disable the ignition if an unauthorised key is used. This makes it unaccessible to the majority of people and is not at risk of being detected by the vehicle's diagnostic tool, making it a very efficient security option.

The autowatch ghost immobiliser has an easy to use interface and is compatible with all kinds of modern vehicle. It doesn't require any additional wiring and can be transferred to a different vehicle. It can detect inputs from CAN bus and can determine if the vehicle was stolen using high-quality sensors.