• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser Problems

Created to guard vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that is able to be fitted without damaging your vehicle. It stops your vehicle from starting until you press a specific sequence of buttons within your vehicle, similar to a password on a mobile phone.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by blocking the engine from starting until it is issued the correct PIN code. This is done with no modifications to the vehicle and is completely undetectable by thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This system is similar to the ones used by car manufacturers for years. However, thieves cannot bypass it with a new key or key relay technology, like they could with factory-installed systems.

A Ghost can be fitted to any vehicle, van, motorhome, caravan or bicycle that has an engine. It's compatible with all the popular brands of vehicles. The same system can be utilized on electric vehicles. It's a great alternative to wheel clamps and steering wheel locks.

When the Ghost how much is a ghost immobiliser activated, it will block all buttons in your car, preventing the ignition from starting without a PIN code. You can enter the code manually or via the Android or Apple app. If the incorrect code is entered the app will display an indicator light. The ghost 2 immobiliser near me will then not allow the vehicle to be restarted. This is a great method to discourage thieves. If the vehicle cannot be started, they will move on.

The Ghost is a weatherproof small device that can be tucked away in the most inaccessible parts of your vehicle. It is extremely easy to install with an average of 20-30 minutes for each vehicle. It is also very easy to remove should you decide to switch your vehicle or hand it in for valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system, and is recognized by some insurers. It also has an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode which can be activated by pressing a button within the app or using your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which can be removed and reinstalled, ghost immobilisers are concealed and are integrated into the car. They are near impossible to hack or bypass and, even if they are found, a thief is unable to start the engine. This is because ghost immobilisers prevent key hacking, signal jamming and device spoofing, all of which are methods that are used frequently by thieves to gain entry into cars fitted with standard immobilisers.

An immobiliser operates by sending an electronic code to the ECU (electronic control unit). If the wrong code is received and the vehicle is not started because the engine won't start up. It is possible to disable a ghost 2 immobiliser cost immobiliser using an application program, but it would be very difficult and time consuming to do so. Only an authorized installer is able to install and use the software.

The Ghost immobiliser is a small system that sits within the vehicles wiring loom and is inaccessible to the naked eye once installed. It does not appear on diagnostic systems. There are no indicators with LEDs, and it isn't able to communicate with the engine via the OBD port. It communicates in a silent manner via the CAN data circuit.

The system will prevent the vehicle from starting unless it is given a specific PIN code sequence. This code can be entered using buttons on the steering wheel or door panels, or centre console. This is a safer way to safeguard your car as it doesn't require an additional remote control or key fob.

Ghost also has a service mode that can be turned on via the mobile application. This lets you hand over your keys to someone else for service or valet parking, without having to enter an arm-disarm sequence.

It is not recommended to remove the system from your Ghost yourself, regardless of whether it how much is a ghost immobiliser in service mode. This can damage the engine. It is recommended to speak with a TASSA-verified installer who can safely and effectively remove the system. Our newest GHOST II immobilisers come with an exclusive QR fingerprint sticker that is hidden in different locations of your vehicle. they are linked to our global security register - in the event that the system is removed and then sold on the black market it will be linked back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a very useful anti-hijack feature. It functions like smart keys and is one of the most secure methods to ensure your car is safe from thieves. When the ignition switch is turned to on, and the car is stationary for a period of 30 seconds, the Ghost system will stop the engine and turn the hazards lights on. This allows the driver or passengers time to press a secret security button (depending on the vehicle) before the system is activated and the engine is again allowed to start.

In contrast to other systems that simply stall the engine whenever the ignition is switched on and on, the Ghost system is based on a specific controller and timer unit that will close the fuel cut-off valve 14 if it is activated after a set period of time even in the event that the ignition is turned on! The delay period should be long enough to allow the owner of the vehicle to leave the vehicle and stay a safe distance from the stalled car before the system can be activated.

The Ghost comes with an additional level of security to prevent common hacking methods used to gain entry to modern vehicles like relay attacks and key range extending. The Ghost system communicates in a silent manner and does not emit signals that can be snatched by thieves using code-grabbing technology or RF scanning.

The Ghost system features a service / valet mode that allows your vehicle to be re-started and driven, without the requirement for a PIN code. This is ideal when you park your vehicle and have to leave it for a brief period of time, for instance, to put your groceries in the boot, or open a garage door, etc. The system will end service mode according to speed and duration or via the simple PIN code entry process, giving you complete peace of mind that only you can use your car!

Keyless Entry

Many customers are now looking for extra security measures due to the growing trend of thefts from cars using contactless. This is especially true for those who have put time or money into personalising their vehicle or own expensive vehicles. An add-on immobiliser can be a cost-effective way to prevent this type of theft as it can prevent your vehicle from starting until the right pin code is entered on your key fob.

Immobilisers are designed to intercept the various circuits in a vehicle which include ones that control the starter motor and fuel pump. They also can shut off the car alarm in order to draw attention and scare off any potential thieves.

These devices connect directly to the engine control unit via the CAN data network and prevent the thief from bypassing it by installing a replacement ECU or using key programmers. These immobilisers are installed discreetly and leave no marks on your vehicle. They are also unnoticeable by hi-tech thieves' tools.

The Ghost immobiliser differs from other systems that require drivers to carry a tag or an app. Instead, you are able to select your own pin sequence by pressing a pattern on your door, steering panel, or centre console. The pin can be changed as frequently as you like, meaning it is as secure as a credit card, and is even more difficult to hack because it requires up to 20 press.

Ghost also comes with a Valet/Service mode that allows you to disable the system if your vehicle is to be turned over for valet parking or for service and allows it to operate within predetermined guidelines, such as a 30mph speed limit, so you don't have to worry about your vehicle being driven at a reckless speed. The system can be activated with the original key or entry code.

Installed by our certified installers and certified installers, it is the most secure and reliable aftermarket CAN-immobiliser that is available. It is also fully certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card with your unique QR code, as well as a secure emergency code that can be kept in the purse or wallet of your car.