• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle from key cloning & stopping thieves driving your vehicle with your original keys. Our latest immobiliser is connected to your vehicles data network, CAN, and a unique PIN code must be entered for the engine to start.

Ghost unlike trackers, does not emit radio frequency signals, and therefore cannot be detected by diagnostic tools. There are also no LED indicators or buttons giving the impression of its presence in your vehicle or van.

Anti-key Cloning

The Ghost immobiliser was created to stop key cloning. The device is connected to your vehicle's CAN data network and creates a unique pin code using the factory buttons on your dashboard and steering. This stops the criminal from being able to start your vehicle. If the incorrect PIN is entered, it will stop your engine from starting and making it impossible to drive off with joy and pride.

Ghost immobilisers employ a new technology which is extremely difficult for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or stolen, the ghost immobiliser is an invisible electronic device that isn't recognized by ordinary thieves because it doesn't emit any radio signals and is completely silent.

This next-generation immobiliser will protect your vehicle from a range of threats, such as key-hacking, relay attacks and copied copies. It can also stop a thief adding a key or replacing your ECU as it won't allow them to start the car without first entering the correct PIN.

In contrast to other immobilisers the ghost immobiliser 2 - click the up coming web page - does not require a key fobs or remotes for operation. It is deactivable by using an app on the smartphone of the driver. This is a great option when you need to give your car to valet parking or servicing without the key fobs.

The Autowatch Ghost-II represents the latest evolution of Ghost's immobiliser. It was designed to be simple and easy to use while remaining as secure as possible. This is accomplished by integrating the Ghost-II into the vehicle's data network CAN, which means there aren't any additional wires to hide or easily located. It has an inbuilt feature that allows users to disable the Ghost-II simply by connecting it to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique employed by professional car thieves to steal vehicles. Thieves can gain access to your vehicle's OBD using the help of a laptop, mobile application, and cables that can be purchased on the internet for less than PS50. Once they have access, they are able to do anything they like to do, from resetting your vehicle's fault codes to tuning your car, or even getting it stolen in less than a minute.

If you have an Ghost immobiliser fitted it can stop your car being stolen using this method, by needing an unique PIN code sequence is entered on your key fob in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit) by using the CAN Data Circuit. This is completely undetectable by any RF scanning technology or code grabbing. It also includes a Service/Valet mode that allows your vehicle to start without needing the PIN code.

To utilize an OBD hacking device, you'll must have a laptop that has software capable of interpreting the OBD protocol. This can be bought for less than PS100 on eBay or Amazon. Also, you will require a cable with OBD pins connected to the CAN Bus. These cables can be bought on Amazon/Ebay around PS50. The cable has to be connected to the wiring harness of your car, like the radio wiring harness.

Once the hacker has established a connection to your vehicles OBD port, they can send diagnostics to the system at high baud rates that can crash the CAN and stop systems inside your car from working. This could cause the engine to stall or even lock doors, and even the brakes to activate.

No need for additional remotes or key fobs

A car immobiliser is a fantastic piece of anti-theft technology that is used by billions of modern cars around the world. Using engine ECU software to prevent cars from starting if a false transponder signal is transmitted to it an aftermarket immobiliser is an excellent method of protecting your vehicle.

However, it could be easy for a thief to get around an immobiliser system in the event that they have access the code that allows them to disable it. The batteries in the majority of key fobs can be removed by prying it open and a burglar can use a simple tool to remove the immobiliser's internal circuit board and replace it with the blank. Then, they will be able to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet data loop in the CAN which cannot be detected by diagnostic tools like those used by high tech thieves. It also doesn't use a traditional key-fob with LED indicators, which means it is able to go unnoticed at a glance.

You may need to deactivate autowatch ghost 2 immobiliser's Ghost 2 auto protection at times like during valet parking or a service job. The ghost CAN immobiliser has a special mode for this, referred to as 'Service Mode that can be activated with a push of a button on your phone. The car can still be operated however its maximum speed will be restricted to 36mph for greater security.

If you'd like to learn more about the TASSA certified ghost immobiliser, contact us today to arrange an appointment in our workshop. A member of our team will provide an in-depth explanation of the process and provide you with owner's manuals, installation certificate, Ghost 2 emergency card and a security guarantee.

Simple Change of PIN Code

Ghost is the latest generation of device that locks your car without cutting wires or installing aftermarket key fobs. It connects directly to the vehicle's CAN data network, and a unique PIN code is programmed into it via buttons on your steering wheel and dash. The device does not emit RF signals, which means it is not able to be tampered with. This makes it undetectable by sophisticated scans using RF or code-grabbing technologies that modern thieves use.

The PIN code sequence can be changed anytime you want to lock out previous drivers and even includes an override code in the event of a sequence that is not remembered. During installation, the installer will demonstrate how to accomplish this. The system includes a valet mode feature that allows you to temporarily disable pin input sequences so that the garage or mechanic can work on the vehicle without knowing the code. This is ideal for customers who wish to surrender their car to valet parking / service but don't want give away the PIN sequence.

Ghost is an individual system that utilizes the buttons on your car to create an unique and interchangeable PIN sequence. This sequence is entered through the app on your smartphone, which means no extra LED indications are thrown and your car is safe from the risk of being blocked by hackers or other technology.

Every vehicle is tested

A ghost autowatch immobiliser immobiliser, in contrast to key fobs which require pressing buttons, is discretely installed under the dash or steering wheel. It is not obvious that it's there. The device is connected to the car's CAN data networks and the personalised PIN code is programmed by using the buttons already on your vehicle. The system will not allow your car to start until this code is entered. This means that thieves can't duplicate the keys of your car or use the OBD to hack into it.

Ghost is a great option for all vehicles including electric cars, vans, motorhomes and bikes. It's also extremely versatile and can be programmed to deactivate in a variety of situations. For instance, it could be programmed to enter Valet mode when the vehicle is being transported to a valet parking or servicing company. This allows you to drive within a speed limit of 30 mph, and the ghost 2 immobiliser problems immobiliser will start to activate itself when your vehicle returns to your home.

Another excellent feature is that the device can be reset to your personal PIN code at any time. This is great if you forget the code or in the event that the device becomes unusable.

The device is also completely inaccessible to anyone who doesn't even know what it is. It works by running through the buttons on your car's dashboard and steering wheel, and uses the data they send to identify the buttons that have been pressed. This makes it a secure and reliable security option that can't be tampered with by jamming, RF scanning or door lock pick sets.