• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser Problems

It is designed to safeguard vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that is able to be fitted without damaging your car. It stops you from starting your car unless you have entered the correct sequence of buttons in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost Immobilisers stop vehicles being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done without modifications to the vehicle and is completely undetectable by thieves. The unit communicates with the ECU via the CAN data bus to disable the vehicle. This system is very like the one automobile manufacturers have been using in their cars for years, however, the thief isn't able to add a key or use key relay technology to bypass it as they can with factory fitted systems.

Ghost is compatible with all vehicles with an engine, which includes motorhomes, vans, cars, caravans, and bikes. The same system can also be utilized on electric vehicles. It's a great alternative to locking the steering wheel and wheel clamps, and can be installed with minimal effort.

When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from starting until a PIN code has been entered prior to. You can enter the code manually or through the Android or Apple app. If the incorrect code is entered, the app will display an indicator light. The Ghost will then not allow the vehicle be started again. This is a great way to discourage thieves. If the vehicle is unable to be started, they will move on.

The Ghost is a small, weatherproof device that can be hidden in the most difficult to reach areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also very easy to remove if you decide to change your vehicle or return it to valet parking or service. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by some insurers. It is also equipped with an emergency Pin Code override and features a Service/Valet Mode that can be activated using the application's button or using your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which can be removed, ghost immobilisers are hidden and integrated into the car. They are near impossible to hack or bypass and even if discovered, a burglar is unable to start the engine. ghost immobiliser car immobilisers are able to prevent key cloning and signal jamming and devices spoofing. These are techniques thieves employ to gain access into cars with standard immobilisers.

An immobiliser operates by sending an electronic code to the ECU (electronic control unit). If the incorrect code is received the vehicle will not be started because the engine will not fire up. It is possible to disable a ghost immobiliser with the aid of a software program, however it's extremely difficult and time-consuming to accomplish this. Only an authorized installer can install and use the software.

The Ghost immobiliser is a tiny device that is part of the vehicles wiring loom and is not visible to the naked eye once installed. It will not show up on diagnostic systems, there are no LED indicators and it does not communicate with the engine via the OBD port. It communicates in silence through the CAN data loop.

The system will block the vehicle from starting unless it is given a specific PIN code sequence. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a safer way to protect your car since it doesn't require the use of keys or remote control.

Ghost also has a service mode that can be activated via the mobile application. This allows you to give your keys to someone else to use for valet parking or service, without the need to enter the disarm sequence.

You should never remove the system from your Ghost by yourself, no matter whether it's in service mode. This could cause damage to your engine. It is recommended to speak with an TASSA certified installer who will be able to remove the system safely and properly. Our latest GHOST immobilisers come with a unique fingerprint QR sticker that is hidden in various parts of your vehicle. These are linked to our security register. If the device is removed and then sold on the black market it will be able to trace the owner of the system.

Anti-Hijack

ghost car immobiliser Immobiliser 2 has a very useful anti-hijack feature. It functions like an intelligent key and is among the most secure methods to ensure your car immobiliser ghost is safe from theft. If the ignition switch is turned to on, and the vehicle is stationary for a period of 30 seconds, the ghost 2 immobiliser cost system will automatically stall the engine and turn on the hazard lights on. This gives the driver or passengers enough time to press a hidden security button (depending on the vehicle) before the system reactivates and the engine is again allowed to begin.

In contrast to other systems that simply stop the engine whenever the ignition switch is turned on, the Ghost system has a unique controller and timer unit which will shut off the valve for cutting off fuel 14 in the event that it is activated within an agreed-upon time even when the ignition is turned on! The delay time interval needs to be long enough to allow the victim of the vehicle to move away from the location of the robbery and sufficient distance from the vehicle that is stalled before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an additional level of security that prevents common methods of hacking that are used to hack into modern vehicles like relay attacks key range extending, key range hacking and ECU swapping. This is due to the fact that the Ghost system communicates silently and does not emit any signals that could be detected by a criminal using RF scanning or code grabbing technology.

The Ghost system has an option for service or valet mode which allows your vehicle to be temporarily started and driven, without the requirement for a PIN code. This is a great option when you park your vehicle and only need to leave it briefly in order to open the garage door or place groceries in the boot. The system will exit the service mode based on speed and time or through the simple input of a PIN code process. This will give you complete security that only YOU are able to drive your vehicle!

Keyless Entry

Many consumers are now looking for extra security measures due to the increasing trend of car thefts using contactless technology. This is especially applicable to those who have put in time and money to customise their vehicle or own rare/expensive automobiles. A supplementary immobiliser is an affordable method to stop this kind of theft since it can stop your vehicle from starting until the proper pin code is entered into your key fob.

Immobilisers are designed for various vehicle circuits, including ones that control starter motors as well as fuel pumps. They also have the capability of shutting the car alarm to draw attention and scare off any potential thieves.

These devices are directly connected to the engine control unit via the CAN data network and prevent the thief from bypassing it by installing a replacement ECU or by using key programmers. These immobilisers can be fitted in a discreet manner inside your vehicle, leaving no trace and are totally invisible to the tools sophisticated thieves use.

Unlike other systems that require a particular app, or a tag to be worn on the person of the driver the Ghost immobiliser is only disarmed by pressing a series of the existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to choose a personal pin sequence. The pin can be easily changed to make the device as secure as a credit card. It can also be more difficult to hack since it requires as many as 20 press.

Ghost also comes with the Valet/Service mode, which lets you deactivate the system when your vehicle will be handed over for valet parking or for service, enabling it to operate within set parameters, like a 30mph speed limit and you don't have to worry about your vehicle being driven recklessly. It can be activated by using the original key or the key that corresponds to the entry code.

This makes it the most effective and secure aftermarket CAN immobiliser on the market, and is insurance approved by Thatcham as an optional accessory for your car when installed by one of our certified installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card containing your unique QR code as well as an emergency code that is secure, all of which can be kept in the purse or wallet of your vehicle.