• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons to Change Door Lock

You can change your door lock for many reasons, from improving the security of your house to redecorating your entryway. You may also need to change locks if the key gets stuck or is difficult to turn.

Even DIY beginners can easily change their lock. Begin by gathering the materials you need.

Remove the old lock

Before installing a new lock it is essential to remove the old one from the door. This is important when you suspect that someone else might have access to the home. It is also an ideal option if you have moved into a house that was burglarized, or welcomed a new roommate. The process is a lot simpler than you might think and can be completed in only a few minutes.

Begin by removing the screws that hold the deadbolt faceplate on the door frame. You'll have to take off the screws on both sides of the door to remove the faceplate. This will let you see what is behind it, and will provide you with a better understanding of how to proceed in the next steps.

After removing the old faceplate you will have to take off the bolt as well as the strike plate and strike plate. Use a screwdriver or a wrench to loosen the bolt, and then take it out of the hole in the door. If the bolt is rusty, you may need to use a chisel hammer it out. If you are using a chisel, be careful not to damage the door frame.

Before you take down the old lock, be sure that your new deadbolt and doorknob will fit into the holes in the door. Many hardware stores and large box stores stock a range of locks and can assist you in selecting the best one. If the lock you bought does not match your door, send it back and ask for assistance.

While you're taking off the old lock, search for small notches or depressions in the handle or around the trim. If you are able to locate them, insert straightened safety pins or a flat screwdriver in order to remove the handle.

After taking the screw off the handle, you can start removing the knob. To do this, locate the set screw on the knob's base and loosen it. Then, take the spindle off.

Install the new lock

It's a great idea to change the locks on your doors frequently, especially if you have had a break-in. It's an inexpensive, simple and effective method to ensure that your home is secure. The majority of people can do this yourself with a screwdriver and a few basic instructions. Based on the situation you might also want to learn how to rekey a door lock so that only you have the key.

You'll need to purchase an additional lock that has the same keyway as the existing lock. Locksmiths are usually able to rekey your lock for you at an additional cost but you can save money by doing it yourself. You can purchase a new lock from an hardware store or online. Standard deadbolts can be fitted to most doors. However, you'll need to measure your door to make sure it is suitable.

Most of the time your new lock will include the cardboard template that will show you how it will fit on the door. It can be used as a reference for drilling the hole, which is a lot easier than measuring every time. If the template doesn't align with your hole, you can take it back to the store and request a Replacement Window locks.

When you install the new lock, be sure to place it on the right side of the door. Examine the latch. It should have a label that says "up" or something similar. Make sure the latch is properly placed in the latch plate, then secure it with the screws provided.

If you're replacing locks on doors, it's also important to be aware of the way it's operated. Some knob locks are right-handed. If you're not careful, you could put the knob on the wrong side of the door, which will hinder you from locking it from either the inside or the outside.

After you've finished testing your new lock to make sure it functions. You should be in a position to lock the door from both the inside and outside, as well as unlock it with a key. If you aren't satisfied with the outcome, you can always call a professional locksmith to fix it.

Test the lock

While a door lock that isn't able to be opened can be frustrating but it could also put your family's security at risk. It's a good thing that it's simple to fix most problems with door locks by doing some troubleshooting, and lubrication. Make sure that the key is correctly cut, and that the lock assembly isn't dirty or loose. If this doesn't solve the problem Try lubricating the door lock actuator using powdered graphite.

Make sure that the doorlock switch, wiring harnesses, and actuator connectors are all working properly. Consult the wiring diagram or manual to determine the color-coding and the function of each wire of the door lock switch. Utilize a digital meter or test light to verify that the actuator is receiving power and ground whenever the switches are activated. If you can see voltage toggles with each switch it means that the switches are in good working order and the actuator will need replacing.

If the switch seems to be working but the actuator doesn't move when you turn the knob it could be an issue with the actuator itself. The actuator cylinder is equipped with pins that are spring-loaded. They prevent the cylinder from moving until the key is inserted and then they push them upwards to match the height of the key in that area. In the end, this causes the cylinder to rotate and let the upvc window lock repair cost body open which allows the handle to latch.

If the door lock actuator is faulty, you can remove the switch and wires from the actuator with a small screwdriver to release the locking bolt and separate the plastic cover that houses the electrical connector. Then disconnect the door lock actuator and let it drop down. Then, you should be able find the two 10mm bolts that hold the actuator in place and remove them. After the actuator has been removed, you can disconnect the black electrical connector.

Replace the key

If your keyed deadbolt or door knob isn't working, you'll have to reset it or replace window lock it. It is not difficult to do this yourself and can save you a lot of money. But, prior to doing this, it's recommended to have a locksmith look over the locks and check for any problems. This will give peace of peace of mind knowing that your home is safe and secure.

To begin, take off the exterior faceplate from the deadbolt or doorknob. There could be screws that hold it in place, if so use a screwdriver to loosen them, and then pull the faceplate off. Next, use a flat head screwdriver to remove the interior faceplate. Once you have removed your faceplate, you are able to remove the bolt and screw from the lock cylinder.

A locksmith can help determine if the existing lock requires upvc replacement window locks or rekeyed. They can also give you advice about the best security options for your home. They can also make necessary modifications to your door and frame to ensure a perfect fit. They also offer the guarantee for their work.

If you decide to rekey the lock you must first purchase the new key. It is essential to use the lock key that is fitted snugly. A key that's not the right size may cause damage to the internal mechanism of the lock and prevent it from working. To determine the size of a key, just insert it into the lock. If it is in a flush with the plug it's the correct size. If the pins stick up from the top of plug and are not a good fit, they're too long.

There are many reasons you might want to replace your door lock, for example:

If you're moving into a former owner's home or if you have lost keys, rekeying the lock can be a more affordable option than replacing it. It is also less invasive than a complete replacement. Rekeying an existing lock might not be feasible in some circumstances. If the lock has been damaged or repeatedly jammed, as in it could be the right time to replace it.