• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence up to 20 presses. This will then allow your vehicle to begin.

Simple process to change the PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of aftermarket security devices available including tracking systems, immobilisers and alarms. They're not all equally effective at protecting your car. While a tracking system may help you find your car in the case of theft, ghost Immobiliser installers Near Me it can not prevent the crime from happening in the first instance. An immobiliser, on the contrary is exactly what says on the tin: it disables your car's engine so that it is unable to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your car.

The ghost immobilisers device utilizes the buttons on your car to generate a unique sequence which must be entered to allow the engine to start. This can be done by using the heater, window or indicator stalk buttons. In addition, there is also an app for mobile devices that can act as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is a great solution for those who want to offer your car to valet parking or for maintenance. The immobiliser remains in operation.

The ghost immobiliser fitting is a very unique and innovative device which works in conjunction with buttons on your vehicle instead of being a separate device. It's not just an effective deterrent to theft of your vehicle and vandalism, but it can also be used on any future vehicles you may own. This makes it a much better investment than a conventional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is a high-tech security device that protects your pride and joy against key cloning, hacking & ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be fitted into the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of using CAN data is that it runs silently compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technology and cannot be recognized by conventional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons on your vehicle, such as the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can create a sequence that is as long as 20 presses to provide additional security. The iPhone app allows only one connection, using a unique pairing code for the ghost immobiliser Installers Near me. All communication between the two devices is encrypted.

The Ghost also prevents car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only run only if a valid PIN is entered. It is also possible to put it into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) to allow you to hand your car over to a valet service or for maintenance without having to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a specific code. The system can be activated or deactivated by using your smartphone's application without the need for additional wires.

Standard factory immobilisers for vehicles function by using a transponder inside the key, which sends an indication to the ECU. The car will start when the correct code is sent. If, however, the transponder from a different vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle be stolen and started. A South African company that is at the forefront of safety systems technology developed the Ghost immobiliser. It shields you from hacking or key cloning and even key theft. Only by physically towing your vehicle away can thieves take it away and not be able to drive it.

Ghost makes use of buttons on your vehicle, like the indicator stalk, the steering wheel, and door panels, to create an individual PIN code that needs to be entered to use your car. This is done without the need for additional hardware like key fobs and can last up to 20 presses long. It is also undetectable by devices for diagnosis and transmits radio frequency signals, so thieves cannot make use of sophisticated RF scanners or code grabbing technologies to detect that a system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is concealed within the vehicle to ensure that it can't be removed or disabled by thieves. It is even more difficult to get rid of than a car alarm that requires disarming with the use of a button sequence. This makes it an excellent alternative to a GPS tracker that can assist in locating your car after it's been stolen.

Emergency PIN code override

You do not have to look too far on social media to see stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without your original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of protection to stop your vehicle from being taken in the event of being targeted by thieves. It generates a unique pin code by pushing the buttons on your steering wheel, door panel, and on the centre console. The unique pin code must be entered in conjunction with your original key fob to stop the vehicle from beginning. The unique override pin is located on a black card which you will receive following the installation. It is easy to remember because there are no LED indicators.

The device is hidden within the wiring of the vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can determine the type of security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

In contrast to other security systems which rely on a relay in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending a digital block of commands to both the ECU and the engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems but this must be specified prior to installing the device. They are also fully service/valet mode-compatible and are a great alternative to a tracker if you are you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent years there has been an rise in the number of vehicles being stolen with no owner's keys. With easy access to key cloning tools and door lock pick sets, it is now easier than ever for thieves to take your prized possessions. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been cloned or your car has been hijacked.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequency or ghost immobiliser installers near me key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of a new key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden within your vehicle and is reached via the buttons on your steering wheel, centre console, and door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser to be created that will stop your car from being moved away or even started in the event that a PIN code hasn't been entered prior to. If you're driving away with the device arming it will display an indicator on your dashboard and flash continuously for approximately 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN code at this time the indication will continue to flash and require a new PIN code every attempt to start your car.