• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles of your home are an essential part of the design. A new handle will bring your home's decor up-to-date.

Over time the knobs on your door could become stiff or even break. These are indicators that it's time to replace the knobs. This guide will help you select the correct door handle upvc replacement door handles for your home.

Door Knobs

Door uvpc Window handles can enhance the aesthetics of your home while also making it easier for people to open and shut doors. They are available in a wide range of finishes, colors, and styles that will complement your decor. If yours is beginning to show signs of wear or requires an upgrade You can change them in just a few simple steps.

You must locate the spindle, or shaft through which the knob is attached to the door. Some knobs have a tiny opening that you can use a screwdriver to remove the set screws that keep the handle in place. Some have a small slot or hole that allows you to press the spring-activated detent pin using a flathead. When you press the pin it opens the latch mechanism and allows you to pull or push the knob.

Once you have the spindle, or shaft in your hand take the knob off and replace it. Make sure it is aligned correctly and ensure whether the latch works before tightening the new set screws.

After replacing the knob, you can place the rod for the latch into the hole on the door. Secure it by securing it to the rod system on the second knob. Make sure the holes are aligned, then tighten the screws on the latch plate.

Some people prefer a smooth or brushed metal finish for the door hardware to give their home a modern and sleek look. This can be matched with their furniture. Some prefer a rustic look that is perfect for farmhouse-style rooms. If you have one of your family members with mobility issues, you might want to choose an rim or lever lock that require less pressure to operate.

While aesthetics have traditionally been the most important factor in door handle design, other aspects are becoming more important as well. Accessibility and control of infections are key issues that have led to the creation of innovative new handle designs like those that can be operated with the forearms of a person.

Latch

The latch that opens your door can wear out from the wear and tear of use. It is simple to replace the latch on your door handle. This will make a big difference in how it opens and closes.

Depending on the type of knob you have the latch could be a part of the knob or it might be an independent piece attached to the door itself. In any case, you'll follow the same procedure for removing and replacing. It's simple to remove the old latch, especially when you have doors with a "magic" button. This tiny pressure-slot, found on the side knob is what you will need to press in order to remove the latch of the handle.

If your handle doesn't have this magic button you will need to remove the cover plates placed over the latch plate. They are typically circular or rectangular and can be removed using a screwdriver to pry them off the handle. Some have a small slot inside that you can slide your screwdriver, whereas others snap off.

Then, remove the machine screws that attach the inner plate and latch to the upvc door handle replacement handle. It is important to keep these shorter screws with an angled tip in a safe place in order to reuse them later. After the screws are removed, you can remove the latch plate and mechanism from the hole, and then set it aside.

You can now begin installing the new latch. Install the inside plate of the latch into the hole in the door, and secure it using the provided hardware. Make sure that the square pin on the interior of the latch is pointing towards the latching mechanism inside the handle and that it is lined up with the other screw chambers inside the door handle. Then, secure the exterior latch plate using the screws provided.

Strike Plate

One of the most common reasons for replacing a door handle is because it feels loose or doesn't lock properly. This is often caused by misaligned components in the latching mechanism, such as the strike plate being too small or has moved upwards or downwards on the doorjamb with time. This easy project allows you to replace your existing strike plate with a longer, new one that will provide better security and ensure that your door stays shut.

Apply a lipstick or another marking material on the latch bolt to check if it is the strike plate. Close the door, then try to latch it. If the mark is located below the strike plate hole this indicates that your door won't latch because the plate isn't long enough. If the mark is above or below the strikeplate hole, the strikeplate may have been moved upwards or downwards on the doorjamb.

You may be able simply to put the new strikeplate in place over the one you have already installed using the screws that come with it, depending on your door. You may have to first drill holes and then chisel the wood to ensure a perfect fit. If this is the case, be cautious not to chisel too hard or you'll cause damage to the integrity of your doorjamb.

Installing a brand new box-style strike plate will provide the lock with a stronger hold on the doors and require more force to open them. Typically it will require two longer screws to secure the strike plate to the upvc sliding door handle frame. You'll need remove the old strike plate and then drill and chisel the wood to make space for the new one.

This difficult-to-find strike plate is made from solid brass and has an extremely thick. It's specifically designed to be used with antique rim locks. It comes with both wood screws and machine screws, which means you'll have the correct hardware for the job. Keep in mind that wood screws have a pointed tip whereas machine screws are blunter.