• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Unstick a suzuki car key Ignis Key

Suzuki's quirky, inexpensive city car is getting a midlife upgrade. It's no hot-hatch but it eats up urban and rural tarmac with gusto, while its nifty turning circle makes city driving effortless.

The new model also comes packed with clever driver assistance and safety technology which includes lane departure warning and sleepiness detection alarm, which are both welcome additions to long drives.

Steering Lock

The steering lock is a crucial security feature to prevent your Ignis being stolen when it's in drive. It's an important security measure, but it can be frustrating when you need to go to a location and you are unable to unlock the wheel. There are a few simple actions you can take to fix the issue.

First, make sure the ignition switch is set to "on". If that's the case, then try turning the key in the same direction you did before the wheel became locked. This could be tricky, but it's typically enough to unlock the wheel.

If the wheel does not unlock after spraying canned air in the ignition cylinder, it is possible to apply lubrication to the cylinder. Make sure you wear eye protection before doing this so that you do not get any canned air in your eyes! You can also make use of liquid graphite to lubricate your cylinder.

If none of them work it is necessary to replace the ignition assembly. Fortunately, this is an easy component to locate at any auto parts retailer. Just make sure you purchase the exact replacement key for suzuki Sx4, and then compare it to your old one before you attempt to install it. Also, make sure to remove the cover covering the ignition so that you can inspect the assembly.

Worn

The steering lock could cause the ignition switch to get stuck. This is a security feature designed to prevent your Ignis from slipping away when the engine is running. If this happens, manipulating the steering wheel will release it.

Over time, your Ignis key can start to wear out and become more difficult to turn. It's not as common as a defective ignition switch, but it is a possibility that it will happen. If this is the case, then you need to replace your key.

Find out if anything is preventing your Ignis ignition key from entering the cylinder. There can be dirt or debris that could get stuck in the ignition cylinder and block it from turning.

You can also try a little lubricant to see whether it helps. There are many different types of lubricant that you can purchase, so check out your garage or go to a local auto parts store to find one that will work.

Another option is to utilize the silicon "glow in the dark" key cover. These covers absorb light energy and release it when in dark or hazy conditions. These covers will also protect your keys from wear and tear. They are offered for the majority of Suzuki models and are available online or from a nearby Suzuki dealership.

Bent

With time and repeated use, keys can get bent. The teeth of the keys may not engage with lock cylinders in the same manner. This can stop the key from turning. If this is the case, the key will need to be replaced. If you have spare car keys suzuki keys, it's an ideal idea to get it duplicated and put it in a safe place.

Another reason could be that the ignition cylinder itself can wear out. If the lock pins in the cylinder are stuck or jammed together the cylinder may be unable to allow keys from going all the way into or out of the cylinder. Replacing the cylinder can solve this issue, however it is best to do so before your key gets stuck in the ignition to avoid further damage.

If your Ignis key stuck despite trying simple fixes it could be time to consider lubricating the cylinder. Graphite powder or liquid graphite may help the lock pins move more freely, and also free your key. It is available at most auto parts stores. Make sure you put your Ignis in park before applying the oil. Do not attempt to manhandle the Ignis to release it from its binding. This could cause more serious issues.

Broken

If you have tried a variety of ways to make a key unstick but it doesn't budge, the last resort is to use a lubricant to get it moving. You can buy some of this from your local auto parts store and apply it to the inside of the ignition lock cylinder using a cotton ball, or a rag. Try again. Move the key backwards and forwards gently to spread the fluid. You can try pushing it forward, but be careful not to push too hard or you could break it in the cylinder.

It is also possible that the circuitry inside the key will become unresponsive over time. This isn't as common and usually means that you'll need to get the key duplicated to make room for a new one.

Finally, the case of the case of your Suzuki key fob might become worn or damaged. This is particularly true if you are using an imitation key fob with a plastic or rubber shell. The Key Crew may be in a position to transfer the internal circuitry from your old keyfob into a replacement suzuki car keys case depending on the circumstances. This will reduce the expense of purchasing an entirely new keyfob. We'll let you know what options are available for your particular situation when we call you to schedule the service.