• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your pet move around whenever they want without you having to let them in or out. They also help prevent your cat from toileting inside the house.

Fitting a cat flap in the door panel made of upvc is much easier than in a glass door, but it will require some expertise and the proper tools.

Take a measurement of the door

Fitting a cat flap in the door isn't easy but as long as you choose the right type of cat flap, take your time and follow the instructions provided it should not prove to be a problem. We will be showing how to trace the shape, using a jigsaw to cut out the area in the door and then finish off the job by fixing the flap to the door. This will ensure that the flap stays in place and shields the door from rain and wind which can cause damage.

The first thing to do is determine the width of your pet to determine an accurate estimate of the size of cat flap you'll require. This will ensure that the flap is big enough that your pet can go inside and out of the house without having to open and close the door every time, but also small enough to prevent the pet from straying too far in either direction.

Once you have the measurements, you can mark out where on the door the template should be placed, usually, this is done using an X, but some kits include drawings that show the location to drill, if yours does, then you can stick it to the door and draw a line around the door. If your door has moulding or sill on the bottom edge ensure that you have enough clearance from these because this will ensure your cat's safety and stop them from gaining access to your home.

Then put on your eye protection and a dust mask and using a jigsaw begin to cut along the line that you have pencilled in, but don't push the blade too hard, as this could cause it to cut faster than you would like it to. Set the square with a ruler to ensure you are cutting the material correctly and that the hole is a rectangle. When you are satisfied with the result, you can take the door material off.

Draw a Line

The cat flap is a great way to let your pet out and in without worrying about them being in the house with a visitor, or leaving unwelcome gifts in the house. It also helps prevent draughts and keeps your home's temperature steady. However, installing the cat flap to your door could be an overwhelming task for those who have never done it before, which is why many people to seek out a professional carpenter or joiner to complete the task. This is a viable option, however you can do it yourself if the tools are appropriate and the steps are adhered to.

It is much easier to do with a wooden door, but it is still possible with uPVC. However you should be cautious not to damage the doors as this could invalidate your guarantee. The first step is to measure the door and ensure that it will fit the new cat flap. This should be simple enough if you are using the standard uPVC door, however you may require extra care if you are using a composite or other type of door as these are more difficult to cut into than solid uPVC panels.

Next, you will need to determine the belly height of your cat. This is the measurement from the floor to the bottom of the cat's stomach and you'll need to find a spot on the door that will be within the range that your pet can comfortably go through. Once you know this, you will be required to mark the area using an eraser and a spirit level to ensure that the hole you will make will be a good fit for your cat flap cost.

Once you've marked the area, it is time to make the hole. It is important to take your time and use a jigsaw to ensure that the cuts are clean and smooth, not rough and uneven. This could damage your door. You should also remember to wear safety glasses and a dust protection mask whenever using the jigsaw, since breathing in the dust could be harmful to your health. After you've finished the cutting, you'll have to smooth out the edges of the hole using sandpaper so that your cat flap will fit easily into place.

Cut a hole

It isn't easy to install the cat flap onto a door panel or sealed double glazing unit. If you are not very experienced in DIY, it's recommended to hire a professional to complete the job for you. A shoddy job might not only look ugly, but it could also be a security risk and also allow cold air to get in when the cat flap installer near me is outside, and hot air to escape when inside.

Mark the hole position on the door using the help of a pencil and a spirit level. This will ensure it is properly positioned and aligns with the rest of the door. Make sure you have an sandpaper piece on hand for any rough edges.

Wear any safety gear you need to work with the power tool. If you are worried about the noise of the jigsaw, consider buying a cordless version which is quieter and simpler to use.

It is best to only remove the material needed to create the flap. A small amount of material will be needed to cover the thickness of the the flap, but removing more than that can cause problems and even harm the frame of the door.

A upvc door may have a metal frame or panel which could block the microchip cat flap, and in this case you'll need to cut an over-sized hole to ensure that the metal doesn't touch the the cat flap, if this is the case, it is crucial to fill in the oversize gap and make it watertight.

If you want to install a cat flap in a double-glazed or upvc window with frames made of metal it is necessary to speak with an expert. They will offer you a brand new piece of glass that has the hole that is already designed for the cat flap. It will be much cheaper to have this done than trying to fix the cat flap onto an existing glass pane that has not been manufactured specifically for this purpose.

Place the Flap

Cat flaps allow your pet the freedom to go and come whenever they want and let them relax in the home whenever they like. However, if you own an upvc door panel with cat flap fitted door, it might be difficult to install an animal flap, especially when you don't have glass panes that could be cut for one. Luckily, if you're happy to buy and install a new half-glazed uPVC panel then it is possible to fit a cat flap to the doors. It's not as easy as cutting a hole through the door however, and there are a few things you'll need first to ensure it's secure.

A composite, uPVC, or GRP door panel is usually made up of a plastic skin that is bonded to an insulating polystyrene core. It is crucial to be careful when cutting the material. This kind of door comes with a template that you can use to cut the hole.

After you have carved out the hole in your front door, it's time to install the cat flap. You can purchase and install various models, from basic button operated ones to ones that are activated by microchips that only let in your pet. Whatever type of cat flaps you select, it's vital that your cat is able to use the flap without getting stuck in bad weather.

A circular fitting cat flap in upvc door panel is more effective than a square, because circles can be cut more securely into glass. This is because square holes can make the glass more susceptible to cracking when drilling is applied to it. It's also a safer option as you're not at risk of drilling into toughened glass that could shatter and cause injury to your pet or family members. This is especially crucial if you have a young or elderly person in your home who may be injured by shards of glass.