• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. It is important to keep the same dimensions as the handles for double glazed doors that were previously used when replacing them.

The top screw's location, the lever and the keyhole size are the three measurements you need to determine. Use the size guide to assist you.

Inline Lever/Lever

A lever/lever door handle is a modern handle that can be put in on doors that are new or replacement. This type door handle is available in a variety of styles & finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed from durable materials, and are perfect for doors with multiple points that require a strong design. The handles are inline and work off the same spindle and screw fixings. They are easily installed on new or existing uPVC/Composite doors.

The handle can be positioned and angled to accommodate any user. The handle has been endurance tested to 200,000 cycles, this will ensure the quality of the finish and the performance of the handle over time. The lever that is sprung can be reduced to accommodate more locks. This is particularly useful for doors with narrower openings where the cylinder is further away from the door handle replacement. A shortened lever can also be used for doors with latches which can be operated with the thumb on the inside.

Lever Pad

A Lever Pad door handle made of upvc operates differently from lever-type handles on doors. These handles can operate from a single spindle (inline) or independently from each side by using two offset spindles or inline (pad). They are generally employed on UPVC double glazing door handles glazed doors. They come in a variety of styles and finishes.

The handles have been tested to at least 200k cycles and are available in various finishes, including White, Silver, Chrome & Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high degree of durability and performance for the intended use.

All UPVC lever pads for changing window handles include a spindle and screws and can be mounted on a uPVC door. The 211mm backplate fixation centres allow for a bigger handle, which is typically a benefit when replacing a damaged or old multi-point door lock mechanism. These handle levers are also spring-loaded, thereby solving the issue of handles hanging out of their horizontal position when they are not being used.

When selecting the replacement UPVC handle and spindle, it is essential to match the dimensions of the PZ of the multipoint lock as well as the uPVC door. This measurement is also referred to as 'handle centres' or cylinder centres'. It is important for matching the correct handles.

After you have determined the proper PZ size and the correct PZ size, you must make sure that the lever and push pads are designed to fit the American with Disabilities Act compliant handles you require for your door. They are usually of a round or square design with an internal lever as well as an external push pad.

The majority of UPVC lever pads we offer are sprung, which means that they return to their horizontal position after not being used, instead of hanging out and potentially sticking in the frame. This stops draughts and cold air from entering a property. You will also find that the majority of UPVC lever pad handles are swivel that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are usually found on uPVC doors, but can also be found on other types of door. They work by using a key that unlock a cylinder case that will reveal pins that can be aligned with the pins inside the lock body, permitting them to turn an revolving cam, opening the door. Euro cylinders can be fitted with up to six pins. Doors that are internal and external require different levels of security.

The choice of cylinder is crucial. It's dependent on the amount of use your doors and handles will receive. For instance, doors that are external require an extra secure cylinder, whilst internal doors can be secured using the standard cylinder. Certain cylinders are equipped with additional features that can increase security, like anti-drill or anti bump properties.

To ensure that the euro cylinder is the correct size for your door, it must be measured correctly. The cylinder should be measured from the hole in the center of the fixing screw to the other end of the cylinder, including the thumb turn if you have one. It is best to do this while the lock is in place, but in the event that this is not possible, you can remove it to measure. It is essential to ensure that there is no extension of the cylinder beyond the handle or escutcheon. This can make it susceptible to lock snapping attacks.

Most newer cylinders have been constructed with bump and anti-drill features built into their design. These features are designed to minimize the chance of a attack by causing the cylinder to rotate in a different direction. This can help prevent attacks and protect your doors.

There are also cylinders that are designed to resist snapping. This is a growing type of attack on cylinders, which is where the break line of the lock is attacked using a special tool to break off the front of the cylinder and allow the door to open. This is a quicker and simpler method to gain access than a multipoint locking system. It also leaves less evidence of the break-in which can hinder insurance claims.

Spring Cassette

This spring cassette sits in the base of your door handle backplate, supplying a spring-loaded solution that returns your multipoint lock handles to their original position after using. The handles were previously equipped with no spring and would droop when the locking mechanism was disengaged. The addition of this simple element is one of the best methods to correct this, and is a great way to prevent your doors made of upvc from becoming stuck in an open or closed position, as they aren't always simple to manually close by hand.

The spring cassettes were made to be used with a sprung multipoint lock. They are not compatible with unsprung handles and you'll have to cut a hole in your backplate for them to fit. (Please look at the image for a technical diagram). They are a replacement for broken or missing cassettes within the backplates of door handles of numerous brands of uPVC doors. They feature a square cut-out that can accommodate an 8mm spindle, and are available in a variety of.

These spring cassettes are a great value solution to the issue of door handles that have become sagging. These spring cassettes are simple to install and will extend the life of your uPVC door. For more information on our wide range of uPVC accessories and spares, please feel free to get in touch with our team. We are available to assist you and provide expert advice.