• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles and hinges seem like an insignificant thing but if you aren't happy with the way they look or are unable to use them, it's worth replacing them. Installing a new door handle is simple if you have patience.

Modern door handles are usually equipped with cover plates which hide the screws, giving them a more attractive appearance. However, you will need to attach them separately if your new handle doesn't already have them.

Remove the old handle

Door Upvc Window Locking Handles aren't just an essential for aesthetics of your home but they're also essential for security as they allow you to lock and unlock your door. However, over time your door handle can lose its grip, become loose or start to look old and worn out. This is an indication that it's the time to replace your door handle.

If your door handle is becoming difficult to use, it might be time to replace it. This is a problem since it means you can no longer lock or unlock your door which could be an security risk to you and your family.

It is also an excellent idea to replace the handle on your door in the event that it's damaged or broken. A damaged or broken door handle is dangerous, especially for children and elderly family members who may struggle to open it. They could be trapped. It's simple to fix a damaged handle on the door.

Modern door handles are generally standard sizes and should fit any door. If you're not sure if your new door window handle replacement will fit, try removing the old one and measuring its housing holes. This will let you buy the right size door handle.

It is the easiest way to remove the old door handle by removing it from the door. This is usually done with a screw driver. Some door handles have a cover plate which hides the screws used to mount them. You will need to remove this to get to the screws. After you have removed the handle that was previously used, take note of how the spindle is connected. This will assist you in aligning the new handle.

Alternately, you can take off the door handle by removing it from the latch mechanism. This is typically done with a screwdriver but you'll need to locate the small latch, which should be on the edge of the trim piece. Once you've removed the latch, take the handle off the strike plate, and then remove the latch away from the door's edge.

Remove the Strike Plate

When replacing the handle, you'll need to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The package the new handles are packaged in will have two different latch plates: one that is rectangular and the other circular (see the above diagram that outlines door handle parts). If your current latch plate has rectangular, swap it over to the round one so that the latch hooks onto the strike plate in a way that makes the handle more comfortable to use.

The first step is to unhook the screw holding the latch plate. These screws are often tight, and will require some force to loosen. It might be beneficial to get a second person to assist in this area if it is possible.

The latch plate should easily come out of the upvc sliding door handle once the screws have been removed. If it's stuck or won't move, use a small nail file to scrape around the edges of the latch plate. This may help free the plate.

Now, you can proceed to creating the new door strike plate to be installed. Screw the latch plate into the doorjamb using the wood screws that were included with the new handles. Do not tighten the screws too much as this could damage the strike plate.

If you're not sure if the latch plate is in the correct position, try closing and then opening the door to determine whether it latches and closes correctly. If not, you'll need to adjust the strike plate upwards or down, or move it forward or back until the door shuts and latches correctly.

If the door is jiggling or moving, you may need to enlarge the hole for latching in the strike plate. This is more common in older doors, however it can happen due to wear and tear hinge mortises that are too narrow or are not sized correctly for the latch, or because of a broken or damaged strike plate. If this is the situation, follow the same procedure for adjusting the strike plate, but using a metal file instead of an hammer and chisel.

Eliminating the Latch

The latch is an angled metal piece that slides into and out of a hole on the inside of your door. When you turn the handle, it pushes this latch forward and allows you to open the door. It also catches the door frame to ensure that the door is closed. If your door shakes when you close it, replacing the latch may be all that's needed to correct the issue.

The screws that hold the door latch are difficult to locate, but you can usually use a screwdriver to make a small hole on the trim plate, and then pull the latch off. Once you've removed the trim plate, it'll be simple to remove the latch as well as the remaining bolts that hold the latch and spindle in place.

If the latch is not easily removed using a paperclip or tool to remove it from the handle mechanism. Insert the item into the recessed latch slot and gently twist it or jiggle until the that the latch and handle are beginning to split. It is possible to repeat this procedure several times before you can remove the latch.

It should be possible to slide the new latch into its slot without issues once you have removed the old one. Use the new screws to attach the latch to the strike plate or door frame. Make sure it is correctly placed in the slot, and aligned with the screw chambers.

Take note of the backset (the distance between the center of the large hole in the door's front and the edge) before installing the new handle. Check that the latch size of the new handle is equal to the measurement.

If you are replacing the latch or handle, or if your old lock cylinder has been damaged, then you will need an entirely new one. If you're not replacing the locks, the new latch will fit into your existing recess, and be compatible with the keys you have currently. Select a latch with rectangular cover plates that match the handles you have.

Then remove the Cover Plate

You can replace your old door handles with a contemporary rose and lever designs to make a difference in the appearance of your house. You can purchase complete sets that include escutcheons, privacy adaptors and escutcheons.

To replace an internal door handle take off the cover plate (or rose), which covers the screws and mechanism. Find an opening tab on the plate and make use of a flathead screwdriver to pop it off the knob. It could have an opening on one edge or be secured by a pin.

Remove the screw holding the handle inside and put it aside after the cover plate has been removed. You'll also want to take out the screws that hold the latch and plates to the door, which you can accomplish by loosening them using a Philips screwdriver. Take the inner plates and latch from the door. Place them aside.

Not all doors have this gap. If yours doesn't then you'll have to drill a hole into the door to install the new handle. This is the same procedure for opening a locked door however you'll have to be extra cautious not to harm the door's frame or frame.

Installing new door knob screws is necessary after the holes have been drilled. Buy the same dimensions as your old screws to ensure that you don't get a handle too tight or loose. Installing a new strike rod and latch is also required. They aren't included in the majority of door handle sets.

If you're looking for a quality replacement interior bifold door handles handle set, try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received a plethora of 5-star reviews from happy customers. It's a great option to replace damaged or worn door handle hardware inside your Chevy HHR.