• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors wear out with time and require to be replaced. In this case, it is essential that the new handles match the dimensions of the old handle.

The top screw's location as well as the lever and keyhole size are the three measurements that you need to check. Use the size guide to aid you.

Inline Lever/Lever

A lever or lever door handle is a modern handle that can be installed on doors that are new or replacement. This style of handle is available in a variety of styles and finishes. A number of manufacturers offer this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles made of uPVC/Composite are made of robust materials and are suitable for multi-point lock doors that require a strong design. The handles are inline, and use the same spindle and screws to secure them. They can be easily installed on a new or existing uPVC/Composite doors.

The spring lever design allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been tested for endurance up to 200,000 cycles, which will ensure the quality of the finish as well as the performance of the handle over time. The sprung lever is also adjustable to fit a broad range of locks. This is useful for narrower doors where the cylinder is situated further back from the door. A shorter lever is an excellent option for doors where the latch could be operated by a thumb turn inside.

Lever Pad

A Lever Pad upvc door handle operates differently to the lever type handles on doors. These handles are operated by one spindle, or two spindles, inline or offset. They are generally used on UPVC double glazed doors. They come in a variety of styles and finishes.

The handles have been tested to the minimum of 200k cycles and are available in several finishes including White, Silver, Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for the intended use.

All UPVC handle lever pads include a spindle and screws, and can be fitted on a uPVC door. The backplate fixation centres of 211mm allow for a wider handle, which is typically an advantage when replacing an old or damaged multi-point door lock mechanism. These Brompton carry Handle levers have springs, which can solve the issue of door handles that sag out of horizontal position when not being used.

When choosing the replacement UPVC handle and spindle, it is important to match the dimensions of the PZ of both the multipoint lock and the uPVC door. This measurement may also be referred to as 'handle centres' or cylinder centres'. It is important to match the right handles.

After you have identified the correct size of PZ, you will need to ensure that the push and lever pads are designed to fit the American with Disabilities Act compliant handles that you need for your door. They are usually rectangular or round in shape with an internal lever and an external door handles and locks push pad.

Most of the UPVC lever pads we sell are sprung, meaning that they return to their horizontal position after not in use, instead of hanging out and possibly securing in the frame. This prevents draughts from entering the building. The majority of UPVC lever pad style handles come in both left and right handed models, allowing them to be put on either side of the doors.

Euro Cylinder

Cylinder locks are found on uPVC and other types of doors. The cylinder lock is operated by using a key that unlocks the cylinder's case. This reveals pins that can be aligned with the pins in the lock, allowing them to turn the revolving camera, opening the bifold door handle replacement. Euro Cylinders can be fitted with up to six pins with both internal and external doors generally requiring different levels of security.

The choice of cylinder you choose is vital. It's dependent on the use that your doors and handles will receive. External doors, for instance, should be fitted with cylinders that are more secure and doors inside can be secured using a standard cylinder. Certain cylinders come with extra features that can increase security, like anti-drill or anti bump properties.

To make sure that the euro cylinder is of the right size for your door, it must be measured accurately. The cylinder should be measured from the central fixing screw hole to the end of the cylinder and the thumb turn if you have one. It is recommended to do this while the lock is in place however, in the event that this is not possible, you may remove it to take measurements. A cylinder that extends beyond the handle and escutcheon could be susceptible to attacks like lock snapping, so it is crucial that it is not too long.

Most modern cylinders are made with bump and anti-drill features included in their design. They are designed to minimize attacks by forcing cylinders to turn in a new direction. This can help deflect the attack and keep your doors safe.

Certain cylinders are constructed to withstand snapping. This is a more frequent kind of attack on cylinders, where the break line in the lock is targeted with a special tool to break off the front of the cylinder and allow the door handles victorian to be opened. This is a lot faster and easier to achieve than opening the conservatory door handles with multipoint locks. It also leaves no evidence of a burglary, which can impede an insurance claim.

Spring Cassette

The spring cassette is positioned inside the base of your door handle backplate, providing a spring solution to return the multipoint lock handles back to their normal position after using. The handles had no spring and would droop when the locking mechanism was disengaged. The addition of this simple element is among the best methods to correct this and it is also a great way to prevent your doors made of upvc from getting stuck in the open or closed position, as these aren't always easy to close manually.

These spring cassettes were designed to be used with a spring multipoint lock. They won't work with handles that are not sprung, and you will have to cut a hole into your backplate for them to fit. (Please look at the image for a technical diagram). They are a replacement for broken or missing cassettes in the backplate of the door handle for many brands of uPVC doors. They are available as one unit. They have a square-cut out that can accommodate an 8mm shaft.

These spring cassettes are a great value solution to the problem of door handles that are sagging. They are simple to install and will extend the lifespan of your uPVC door. Please contact our team for more information about our wide range of uPVC accessories and spares. We are on hand to assist and offer expert advice.