• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser Problems

Created to guard vehicles from hacking and key cloning, The Ghost 2 immobiliser is a discrete device that is able to be installed without damaging your vehicle. It will not allow you to start your car ghost immobiliser unless you have entered the correct sequence of buttons in your vehicle. It is similar to the mobile password.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by preventing the engine from starting unless it receives the correct PIN code. This is done with no modification to the vehicle and is completely undetectable by thieves. The unit is directly connected to the ECU via the CAN databus in order to disable the vehicle. This system is similar to that used by car manufacturers for years. However, thieves are unable to bypass it with a new key, or key relay technology, like they can with factory fitted systems.

ghost immobiliser problems is compatible with all vehicles with an engine, which includes motorhomes, vans, cars and caravans as well as bikes. The same system can also be used on electric vehicles. It's a great alternative to wheel clamps and steering wheel locks.

When the Ghost is activated it will disable all buttons on your car and stop the ignition from starting without a PIN code. You can enter the code manually or through the Android or Apple app. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent, and if the vehicle can't be started, the burglar will move on to another target.

The Ghost is a small, weatherproof device that can be tucked away in the most difficult to access areas of your vehicle. It is incredibly easy to install, taking an average of 20-30 minutes per vehicle. It is also easy to remove if you decide to change your vehicle or return it for service or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is recognized by certain insurance companies. It is also equipped with an emergency Pin Code override and features a Service/Valet mode that can be activated by pressing the application's button or with your key fob.

Disarm

Contrary to the mechanical devices, which can be removed and reinstalled, ghost immobilisers are concealed and integrated into the vehicle. They are near impossible to bypass or hack and even if found, a thief will not be able to start the engine. A ghost immobiliser is able to prevent key cloning, as well as signal jamming and devices spoofing. These are methods that thieves use to gain access to vehicles with standard immobilisers.

An immobiliser functions by sending an electronic code to the ECU (electronic control unit). If a wrong code is sent the vehicle will not be started because the engine won't start up. While it is possible to disable the ghost immobiliser using a software tool this would be very lengthy and complicated. Only an authorised installer can install and use the software.

The Ghost immobiliser, a small device, is hidden within the wiring loom of your vehicle. It is not visible to the naked eye once installed. It won't show up on diagnostic systems, there are no LED indicators and it will not connect to the engine via the OBD port. It communicates silently via the CAN data circuit.

The system will block the vehicle from starting until it is given a specific PIN code sequence. This is entered through buttons on the steering wheel, door panels or centre console. This is a safer way to safeguard the car because it doesn't need a remote control or key fob.

ghost immobiliser for sale also has a service-mode that is activated through the mobile application. This lets you give your keys to someone else for valet parking or service without the need to enter a disarm sequence.

You should never remove the system from your Ghost yourself, regardless of whether it's in service mode. This could cause damage to the engine. It is recommended to contact a TASSA certified installer who will be able to remove the system in a safe and secure manner. Our latest GHOST II immobilisers also come with an exclusive QR fingerprint sticker that is hidden in various locations of your vehicle. these are linked to our international security register. In the event that the system is removed and is sold on the black market, it will be linked back to its original owner.

Anti-Hijack

Ghost Immobiliser 2 has a very useful anti-hijack feature. This How much is a ghost immobiliser a clever key that protects your car from theft. Whenever the ignition switch is turned to on, and the car remains stationary for a period of 30 seconds and the Ghost system will stop the engine and turn on the warning lights on. This allows the driver or passenger time to press a hidden security button (depending on the vehicle) before the system reactivates and the engine is again allowed to start.

In contrast to other systems that simply stall the engine once the ignition is switched on, the Ghost system uses a special controller and timer unit that will close the fuel cut-off valve 14 in the event that it is activated within an agreed-upon time even in the event that the ignition is switched on! The delay period must be sufficient to allow the owner of the vehicle to get away, and a distance sufficient from the vehicle that is stalled before the system is reactivated.

In addition to the standard CANbus immobiliser blocking features of the Ghost, it has an extra security level that blocks common hacking methods used to gain access to modern vehicles like relay attacks, key range extending and ECU swapping. This is due to the fact that the Ghost system is completely silent and doesn't emit any signals that can be detected by a thief using RF scanning or code grabbing technology.

The Ghost system has a service / valet mode which allows your vehicle to be temporarily started and driven without the need for a PIN code. This is ideal for those who park their car and only need to leave it for a brief time in order to open the garage door or put groceries in the boot. The system will exit service mode according to speed and duration or through the simple PIN code entry procedure and give you assurance that only YOU are able to use your vehicle!

Keyless Entry

Many customers are now seeking out additional security measures due to the growing trend of thefts from cars using contactless. This is particularly true for those who have put time or money to personalize their vehicle or own expensive vehicles. Immobilisers with add-ons can be a good method to stop this kind of theft, as they can prevent your vehicle from starting until the proper pin code is entered, along with your key fob.

Immobilisers are designed to be used on various vehicle circuits, including ones which control starter motors and fuel pumps. They also have the capability of shutting down the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit and they stop thieves from trying to get around it by putting in a new ECU or using an engine key programmer. The immobilisers can be installed discretely inside your vehicle, leaving no trace and are completely inaccessible to the tools high-tech thieves employ.

Unlike other systems that require a specific application or tag to be worn on the person carrying it and a Ghost immobiliser is only disarmed by pressing a sequence of electronic buttons that are already present on your steering wheel, door panel and central console, allowing you to choose a personal pin sequence. The pin can easily be changed, making the device as secure as a bank card. It's also more difficult to crack because it requires up to 20 press.

Ghost also comes with the option of a valet/service mode that allows you to deactivate the system if your vehicle is going to be handed over to valet parking or service which allows it to operate within predetermined parameters, like a 30mph speed limit which means you don't need to worry about your car being driven recklessly. The system can be activated using the original key or corresponding entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market, and is insurance-approved by Thatcham as an optional accessory to your vehicle when installed by one of our certified installers. The Ghost 2 immobiliser is also provided with six QR fingerprint labels and an ISR contact card with your unique QR code, as well as an emergency code that is secure which are kept in your purse or wallet of your car.