• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires provide a warm, cosy form of heat with no harmful gases or soot. They are easy to set up and operate similar to electric fires.

The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic acid Amplification test that will be used with BioFire filmArray Systems for the detection of known and emerging human acoronaviruses using nasopharyngeal or swabs and saliva samples.

Eco-friendly

Bioethanol is an eco-friendly alternative for gas or wood. The fuel is made from plant by-products and utilizes an natural process to convert sugars into alcohol. Bioethanol has numerous advantages over other types of fireplaces which include no harmful emissions and a much less carbon footprint. Bioethanol is a healthier alternative to other types of fireplaces because it doesn't emit smoke or soot. It also requires no flue, and can therefore be set up anywhere in your home or in your garden.

A multi-drug resistant (MDR) bacteria is one of the most dangerous health threats of our time. New testing methods can identify MDR bacteria early and avoid any further complications. One such test is the BioFire FilmArray multiplex PCR system. This test uses the symptom driven approach to identify pathogens that may cause sepsis. Its results are available within a matter of hours, so healthcare providers can begin treatment immediately.

The process of Molecular PCR that amplifies DNA or RNA molecules into millions or billions of copies. This allows for the analysis of small quantities of body fluid or tissue to determine if certain genetic sequences are present. It is a valuable tool for laboratory professionals and can assist them to diagnose serious diseases in a cost-effective and efficient way. The BioFire film array PCR system is a revolutionary tool for infectious diseases diagnosis. It can be used in a variety of settings, including hospitals and laboratories.

For respiratory tests it is possible to use a simple swab to be applied to your nose and sent to the lab to be analyzed. BioFire's system allows doctors to react quickly and has a short turnaround time. This means that patients will experience better outcomes and will not have to wait for results.

The Chanouf Farm Biofire company has developed an Agroforestry waste recycling system, which makes use of pear and olive tree waste to create organic charcoal and biomass energy. The products are offered to the general public to replace traditional coal briquettes and wood charcoal with eco-friendly alternatives. Additionally the bio-waste products can be burned in a Kachelofen fireplace which produces radiant heat that is a green alternative to electric and gas fires.

Clean burning

With a bio-fire you not only save energy, but also help the environment. bioethanol fireplace insert's combustion doesn't produce harmful gases, such as carbon dioxide. Instead, it releases only heat and water vapour. This makes it a cleaner and safer option for indoor bio ethanol fire use.

Ethanol is a byproduct of the fermentation of sugars from plants and is classed as an energy source that is renewable. This means that it can be produced quickly and will not run out like fossil fuels like oil and coal. Bioethanol reduces dependence on foreign imports, and the risk of shortages.

The bio-fires can be installed easily and in existing fireplace openings or as standalone units. This makes them a great alternative to wood and gas fires. They are also an excellent choice for offices and homes without chimneys or flues.

When a bio-fire is lit the burner is outfitted with a specific media that absorbs ethanol fuel liquid and makes it accessible to be burned. The ethanol fuel is burned in the flames, and the vapors are released into the air via the vent. This makes the flames appear more natural and creates an amazing beauty that cannot be replicated with gas or real wood fires.

bio ethanol fireplace fuel fireplace indoor (recent telegra.ph blog post)-fires benefit from not requiring vents or flue to replenish oxygen during combustion. They don't emit carbon monoxide which is released into the air when gas fireplaces are open-fronted.

The BioFire Respiratory Panel uses multiplex PCR technology to simultaneously test for 19 respiratory pathogens in less than an hour. This allows doctors to detect and eliminate respiratory illnesses more quickly than conventional laboratory tests, which require patient visits. Both the patient as well as the health system gain from this.

Safe indoors

Bio-fires are much safer to use indoors compared to real fires, since they produce no smoke or ash, nor carcinogenic fumes. They also do not emit carbon monoxide, which could cause death if breathed in. The bio fuel fireplace-ethanol fuel they use is flammable it is important to take great care when handling the burner and refuelling your fire. It should be replenished only after the burner has been shut off and the fire is cool. Any spills should be cleaned immediately.

The company's diagnostic FilmArray systems--BioFire 2.0 and BioFire Torch--are easy to use, and run eight different commercially available US Food and Drug Administration approved diagnostic panels as well as three additional panels that have been cleared for emergency use and six environmental test panels. The tests include a revolutionary respiratory panel that has been developed to rapidly identify and differentiate between respiratory diseases, including COVID-19 and emerging coronaviruses.

Its COVID-19 panel has been awarded a grant from the Biomedical Advanced Research and Development Initiative (BARDI), which is part of the US Department of Defense's Strategic Access Program. The COVID-19 system is based upon antigens, which allows physicians to distinguish symptoms caused by COVID-19 from other respiratory infections. This test has similar level of accuracy to the antigen tests that are rapid and are currently being used.

The company is also developing an SARS-CoV-2 test to be used in its Respiratory Panel 2.1. This multiplexed nucleic acids amplification test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens in saliva and nasopharyngeal samples in less than an hours. The test is being developed on an rapid timeline and submission to the FDA for EUA and 510(k) approval is expected in Q3 of 2020.

Bio-ethanol flame effect fires are safe to use, however they should be kept away from combustible items such as curtains, pillows and blankets. They should not be placed close to anything that could ignite and it is recommended to keep flammable items at least 10 feet away from them. The bioethanol fireplace traditional fuel should be stored in a dry, secure space that is not easily reached by pets or children.

Simple to use

A bioethanol fireplace is easy to operate and doesn't have a flue to be concerned about. You only need a place to store it as well as fuel. After you've filled the burner with fuel, light it. This will create an appearance of a flame like an actual fire. After the flame has been ignited it will heat the room but with little or no smoke. It will also produce heat similar to a wood-burning fireplace. Bio fires are also very easy to maintain and don't require any maintenance or maintenance, other than the occasional cleaning.

Contrary to most tests that are rapid that are available, the BioFire RP2.1-EZ test uses a syndromic method to identify common infectious disease symptoms and return results in about 45 minutes. The test is designed for patients with upper-respiratory symptoms and has a specificity of 98 percent. The test can detect 19 viruses and 3 bacteria in a single sample which makes it a great choice for patient management.

The BioFire platform integrates multiplex testing, sample preparation and result reporting in one integrated platform. This lets laboratories to streamline their workflow and eliminates the need for a sequential approach that requires a separate and send-out test. This can lead to better patient outcomes by enabling the appropriate test to be administered first time, and by removing the need for costly tests based on culture. Additionally the BioFire system can detect pathogens as well as their antimicrobial resistance genes at an molecular level, providing information that is more sensitive than conventional methods.

Molecular diagnostics is increasingly used to improve patient outcomes and treatment. The BioFire RP2.1 plus panel employs the syndromic approach to simultaneously target 23 of the most frequently identified pathogens that cause respiratory infections. The assay can be run on the BioFire FilmArray 2.0 and Torch systems, and results are available in approximately 45 minutes.

In the US this test is currently available under FDA Emergency Use Authorization (EUA) and will be made available commercially after the initial DoD demand is met. The BioFire Defense team has developed a fully automated sample-to result assay for rapid detection of COVID-19. The assay is currently being developed and will be available when the initial DoD demands are fulfilled.