• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Do a Door Lock Change

Changing your door lock is an easy and affordable way to improve the security of your home. This process isn't for everyone. It requires a certain amount of patience and expertise.

You must replace the cylinder that is located inside the knob's body. The cylinder is what identifies the key when it's placed into the lock.

Removing the old lock

The first step is to remove the old lock. It's a fairly simple process, however there are a few things to keep in mind. First, ensure that the window lock replacement near me you choose to install is the right size for the door you have. This will ensure that it fits properly and doesn't create a gap around the latch or deadbolt plug.

Once you have removed the latch plate look for two bolts or screws on the inside of the casing, which secure the casing and two halves of the lock together. Unscrew them using a screwdriver and then pull the lock out of the door. If you have a mortise locking mechanism there is a set screw that holds the handle to the spindle. Remove the doorknobs by unscrewing this screw with the help of a screwdriver.

It is also recommended to remove the deadbolt latch and latch plug from the hole in your door jamb. Then, you can put in your new lock. If you are replacing a mortise window lock repairs, you must also measure the distance between the lock case and the door's edge to ensure that your new lock will be able to fit.

It is possible to replace your lock for a variety of reasons, such as the possibility that someone else has the key or if you've got new roommates. You can save money if you remove the lock yourself instead of paying a professional. It is much easier than people think and can be accomplished in a matter of minutes.

Begin by getting rid of the handle and trim from the door. With a flat screwdriver take off the trim. It should be possible to pull off the majority of it. In certain cases you might be able to take off the handles completely. Then, look for a tiny pinhole on the inside and insert a straightened clip into it. This will activate the release mechanism and allow you to remove the handle from the door. Then, look for another small tab that is located inside of the lock, and press it with a screwdriver that is flat. Once the spindle is removed, you can take off the cylinder and the housing.

Selecting a new locking system

There are many options to choose from when it comes to selecting the right lock. Consider the different types of locks and select one that fits the style of your door. Think about the backset which is the distance between the edge and the middle of the hole in the lock. Also consider the cross bore, a small hole at the edge of your door frame. Choose a lock that fits the door thickness and the swing.

The majority of door locks are graded by BHMA and the American National Standards Institute to provide you with an idea of how they will withstand use and how difficult to disable or pick. A grade 3 lock may be the ideal choice for a tranquil apartment in the countryside, whereas replacement upvc window locks of grade 1 could be better suited to the busy streets near the storefront.

Most smart door locks require a digital key code to open. If you are concerned about hacking or other security issues, talk to an expert locksmith.

Replace the cylinder

You can easily replace a damaged or broken door lock cylinder using an easy DIY project. The key is to select the right cylinder, and follow the instructions that accompany it. First, remove the knob or handle if it is present. Then, using a screwdriver, take off the trim around the lock cylinder. After the trim has been removed, it is possible to remove the screws that hold the cylinder with a flathead. The cylinder can then be gently lifted out of the door.

Be sure to measure the length of the new cylinder prior to installing it. With a tape measure, determine the distance between the cylinder's center and its left and right sides. Purchase a new cylinder which has the same measurements. This will stop cylinders from snapping when doors are hit or the key is stuck inside.

Place the replacement upvc window locks cylinder inside the door, and then turn the key. This will ensure that the cylinder is aligned with the carrier, which is typically located on the outside of the lock. Then, loosen the set screws, which should be a couple of turns in the head. If there is a screw located on the exterior of the case that holds the door, you will need to loosen it.

You can replace the cylinder that was used to lock your old lock with a new one by slipping it into the case and then tightening the set screws. You must also install the bracket that connects the cylinder with the stem for the lock indicator that you can do by pulling out three small tabs on back of the cylinder with needle-nose pliers. Then, you'll be able to attach the second bracket to the back of the cylinder. You should then reinstall the strike plate and latch plate, as well as the retaining rings that are attached to the top of the lock cylinder.

Installing the new lock

Begin by measuring the door's width if are replacing an existing lock. Most locksets for residential use have a thickness of 1 3/8 to 1 3/4 inches. If your door is more thick, you will need a door kit that is thick and includes longer screws, longer tail pieces (for door knobs) or spindle extensions (for deadbolts).

The majority of locks come with a thorough installation guide to aid you. Take the time to read the instructions before beginning the process to ensure that you are following all of the necessary steps. The booklet will also give you an idea of the degree of skill required to perform the task. You may want to ask a person who has experience changing locks for assistance if you are changing a lock the first time.

Before installing the new lock, it's recommended to tape over the openings of the old hardware. This will keep the screws from falling out of the holes, and will protect any tile you might have put in the area. This will also protect your tiles from damage caused by dirt, rust and grime. SECURAM Touch comes with a strip painter's tape, which is designed to be used for this purpose, but you can also use gaffer's tape or masking tape if you have it available.

Once you've removed the screws that connect the inside of the lock section to the exterior side, pull it straight away. It's important to do this as quickly as possible so that the lock doesn't end up accidentally closing itself and damage the mechanism.

Fit the new latch bolt into the upper cross bore of your new lock, if it comes with one. Make sure that you place it in the correct position, which is indicated by an arrow. Then, slide the latch plate on top of the bolt and screw it in the correct position.

Screw the deadbolt to the jamb of the door. Test the deadbolt by throwing it a few times to ensure that it extends all the way into the strike plate and is completely secure. Follow the directions included in your electronic smart lock to program it. This involves downloading an application, creating an email address, verifying your identity, and then connecting to the wireless network to add your device.