• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Do a Door Lock Change

Door lock replacement is a simple and affordable method to boost your home's security. This process isn't for all. It requires some expertise and patience.

The cylinder is located within the knob's body. The cylinder is what recognizes the key when it is placed into the lock.

Remove the old lock

First, remove the lock you have been using for a while. It's a fairly simple process, however there are some things to keep in mind. First, make sure that the lock you choose to install is the right size for your door. This will ensure it is secure and doesn't create a gap around the latch or deadbolt.

After you've removed the latch plate, look for two screws or bolts on the inside of the casing that hold the casing and the two halves of the lock together. Unscrew these with the help of a screwdriver, and then pull the lock out of the door. If you have a mortise lock, there might be a set screw located at the base of the handle that holds it to the spindle. Use a screwdriver to remove this screw, then pull out the doorknobs.

Remove the deadbolt as well as the latch plug from the door jamb. Install the new lock. If you're replacing a mortise you should measure the distance between the lock case and your door's edge to ensure that the new lock will fit.

You might want to change your lock for various reasons, such as if you suspect that someone else has the key, or if you've new roommates. You could save money if you take the lock off yourself, instead of hiring an expert. It's much simpler than most people imagine and can be completed in just a few moments.

Remove the trim and handle from your door. With a flat screwdriver take off the trim. You should be able to twist off the majority of it, and in some instances the handles could come off completely. Next, look for a hole on the inside of the handle and insert a straightened clip into it. This will activate the release mechanism, which allows you to remove the handle. Then, look for a small tab that is located inside of the lock, and press it using a flat screwdriver. After the spindle has been removed, you can take off the housing and the cylinder.

Making a choice for a new lock

When it comes to selecting a new lock, you have many options. Consider different types of locks, and find one that matches the style of your door. Consider the backset (the distance between the edge of the door and the center of the hole for the lock) and the cross bore (small hole in the frame of the door frame). Select a window lock repairs that is suitable for the door thickness and swing.

The majority of door locks have been graded by BHMA and the American National Standards Institute to give you an idea of how well they stand up to use and how difficult they are to pick or disable. A grade 3 window lock repairs near me could be the best choice for a peaceful rural apartment complex, while an entry grade lock could hold up better to the traffic that is frequented by a storefront on a busy city street.

Most smart door locks require digital code to open. If you're worried about hacking or other security issues, talk to an expert locksmith.

Replace the cylinder

It is easy to replace a damaged or broken door lock cylinder by doing an easy DIY project. It is essential to choose the appropriate cylinder and follow all instructions. The first step is to take off the knob or handle, should there be one then loosen the trim around the base of the lock cylinder by using a screwdriver. After the trim has been removed, it is possible to remove the screws that hold the cylinder in place using a flathead. The cylinder is then gently removed from the door.

Make sure you measure the length of your new cylinder prior to putting it in place. Find the distance from the center to the left and right sides of the cylinder using the aid of a tape measure. Buy a new cylinder that has the same measurements. This will prevent cylinders from snapping when doors are kicked or the key gets stuck inside.

If you have a suitable upvc replacement window locks cylinder, put it in the door and turn the key. This will align the cylinder with the carrier which is typically on the outside of your lock. You can then loosen the set screws which should be only a couple of turns into the head. It is also necessary to loosen the screw in the edge of the door that holds the case in place, should there be one.

You can replace the cylinder that was used to repair window lock your old lock with the new one by slipping it into the case, and tightening the set screws. The process of reinstalling the component that connects a cylinder to an indicator stem for a lock is also essential. This can be done by pulling three small tabs on the back of the cylindrical with needle-nosed pliers. Attach the smaller bracket to the cylinder's back. You should then reinstall the strike plate and latch plate, along with the retaining rings fixed to the top of the lock cylinder.

Installing a new lock

If you're replacing an old lock, start by taking measurements of the width of the door. The majority of residential locksets have a thickness of 1 3/8 inch to 1 3/4 inches. If your door is thicker than 1 3/8 to 1 3/4 inches, you'll need an extra thick door kit. This would include longer screws and either an extended spindle extension or tail piece for door knobs.

Most locks come equipped with a detailed installation guide to assist you. Take the time to read the instructions before beginning the process to make sure that you are following all of the necessary steps. The booklet will also provide you with an idea of the degree of skill required to perform the task. It is possible to seek out a friend who has experience changing locks for help if you are changing a lock the first time.

It's a good idea to seal the openings of the old hardware prior to installing the new lock. This will stop screws from slipping through the holes, and also protect any tiles you may have installed. It will also protect your tiles from any damage caused by dirt, rust and grime. SECURAM Touch comes with an ad-hoc strip of masking tape or gaffer tape, however you can use any tape you own.

Once you've removed the screws that connect the interior half of the lock section to the exterior side, pull it straight away. It's important to do this as quickly as possible to prevent the lock from accidentally closing on itself and harming the mechanism.

If the new lock comes with a latch bolt, fit the new latch bolt into the upper cross bore. Make sure to place it in the proper position, which is marked by an arrow. Then, screw the latch plate onto the bolt.

Screw the deadbolt to the jamb on the door. Try the deadbolt a few times, throwing it around to ensure it is extending into the strike plate. Follow the directions that come with your electronic smart lock to program it. This involves downloading an app and registering your e-mail address, verifying your identity, and connecting to the wireless network in order to add your device.