• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Autowatch Ghost II Immobiliser Review

Autowatch Ghost is the latest technology in car security. It is invisible to thieves, and it is impossible for them to start the vehicle without a unique pin code.

The system is built on the CAN Data network of your vehicle and is inaudible, meaning it cannot be detected using common radio signals or diagnostic tools. The system does not require any electrical circuits to be cut.

What is a Ghost Immobiliser?

A Ghost Immobiliser is a gadget that helps to protect your car from theft by preventing the engine from starting until you enter a specific pin code. It can be utilized in a variety of vehicles, and unlike standard immobilisers, this one does not require a fob or key to operate. It is also very difficult to bypass or hack and operates silently, meaning that thieves would have to work quickly in order to get away without being noticed.

It guards against signal jamming, spoofing and key cloning - all techniques thieves have used to unlock vehicles equipped with standard immobilisers. The device also prevents thieves from stealing keys by fishing through your letterbox or getting into your home to take the remote control. It can even stop them from stealing your joy and pride in the event that they are able to steal the key, as it prevents them from starting your vehicle until they have entered the code first.

In contrast to passive immobilisers which require a fob or key to be pressed, a ghost immobiliser is designed to be completely sealed within the engine and is connected directly to the vehicle's CAN data circuit. The system generates a pin code when you press buttons on the steering wheel, console or door panels of your car. You will have to enter this code before your engine can start. The system can also be set to service mode to allow your vehicle to start and drive for a short period of time without the requirement for a PIN code, but it will then exit service mode based on the speed and duration.

Because of the technology employed, it is unable to be bypassed or hacked, even with the use of advanced technology like code grabbing or RF scanning devices. It is also impossible for a regular immobiliser to disable it because the device doesn't send the same signal that a typical vehicle immobiliser does and only is functional when connected directly to the circuit CAN.

TASSA (Tracking & Aftermarket Security System Association) has approved the Ghost immobiliser to be an insurance-approved product due to its high-end technology and easy-to-install. We are a proud TASSA approved Ghost installer and can install the device in your vehicle for insurance purposes.

How does the ghost 2 immobiliser reviews Immobiliser Work?

In simple terms, an immobiliser functions by preventing your vehicle from starting when the wrong key or fob is used. This is accomplished by sending an error code from the wrong key or fob to the ECU (Engine Control Unit). The ECU won't recognize it and your car will not start. This is the reason it's essential to ensure that your vehicle is fitted with an immobiliser from a recognised and reputable specialist.

At MotorGuard, MotorGuard is the Midlands' leading vehicle security specialists and installers. We offer an Autowatch Ghost immobiliser fitting service for a large selection of modern cars, so you can rest at ease knowing that your vehicle is safe from thieves.

The Autowatch Ghost immobiliser is one of the first aftermarket CAN bus immobilisers and protects your vehicle against key-cloning, hacking and theft. It's designed to remain undetected by thieves since it doesn't use LED indications or key-fobs, and can be hidden within the wiring of your vehicle to ensure that no extra hardware is needed.

After installation, the system is linked to the CAN system in your vehicle and allows you to create a unique disarm sequence with your own PIN code, which you must enter in order to drive the vehicle. The pin code can be up to 20 presses long to ensure security. Should you forget your pin code, or if the button is broken, the device features an emergency pin code that can be used to reset it and allow your vehicle to start once again.

It's because the Ghost immobiliser can't be bypassed or hacked, that it is such a deterrent to thieves. It also TASSA (Tracking and Aftermarket Security Systems Association) which can reduce your car insurance cost.

As technology continues to advance and improve, ghost immobilisers are becoming more sophisticated. We recommend you contact an Autowatch Ghost fitter as soon as you can to safeguard your pride and joy. We will provide you with a high-quality service whether you are buying a brand new car or upgrading your current vehicle.

Is ghost Immobiliser and tracker Immobiliser compatible my car?

The Ghost is the world's first aftermarket CAN bus immobiliser that provides total protection against modern-day vehicle theft. It protects against key cloning, car hacking as well as ECU swapping. The TASSA-certified ghost immobiliser 2-II system also allows vehicle marking, linking to the International Security Register and enabling your insurance company to confirm that you have a Ghost system installed.

Our Ghost Immobiliser prevents thieves from getting your car started by needing a unique pin code sequence to be entered or the presence of your smartphone using our Autowatch application before it can work. It works just as a pin number for bank cards and makes it impossible for thieves to drive off with your joy and pride without logging in the correct pin or phone. Our Ghost Immobiliser System integrates into the CAN Data Network, so there is no need for wire cutting and it works quietly. It is inaccessible to thieves and isn't detected by the sophisticated scan RF and code grabbing technology which other systems use.

The Autowatch app can then be used to link the Ghost to your smartphone. This lets you enter a temporary 'Service or Valet mode which turns off the ghost for up to 30 mins while you give your vehicle for service or transport. This is then linked to your smartphone using the Autowatch app, which allows you to enter an indefinite "Service or Valet" mode that deactivates the ghost for up to 30 minutes while you give your vehicle for service or transport.

It's no surprise that the number stolen vehicles has increased significantly. This is due to the level of personalisation and modifications that are employed in modern vehicles, as well as the fact that a lot of us drive older vehicles. Many of them are costly and rare vehicles that can take months to repair after being stolen so ensuring your vehicle's security isn't at risk of becoming the next target is crucial. A Ghost immobiliser is a low-cost investment that can ensure that your vehicle is secure and even be used to recover it if it does become stolen.

Does a Ghost Immobiliser operate by cutting principle?

Ghost immobilisers work by blocking your vehicle's engine from starting unless an additional PIN is entered with your key fob. This stops thieves from copying your car keys or hacking into your car's security system. It also can encourage them to leave your vehicle to themselves.

Once it is installed your ghost immobiliser generates an individual pincode that can be up to twenty digits, which you can enter using the buttons on your vehicle (steering wheels or centre consoles, or door panels). The code must be entered to start your car. The code sequence needs to be entered every time you drive your car just as a PIN or password on credit card. The code can be reset easily by entering a series of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN has two deactivation options for valet services and valet, that allow you to temporarily start your car without an access code - similar to keys fobs - while it is in the garage or at a valet parking service. The immobiliser will reactivate automatically when your car is in a parking spot.

Contrary to other security devices available and in comparison to other security devices, the Ghost is totally undetectable by modern thieves since it doesn't feature any LED indicators, and it operates in a silent manner using your vehicle's CAN data network. It's also not prone to the same type of circuit cuts that other security systems are because it doesn't make use of radio signals.

It can also be concealed and discretely installed, making it difficult for thieves to locate. It is also not detected by advanced scanning tools and technology for grabbing codes that are often employed to identify or disable security devices.

The ghost immobiliser and tracker is a sophisticated CAN bus immobiliser that is of high-quality. It offers superior protection against key cloning and relay theft, as well as car hacking. It's simple to set up, undetectable by thieves and is not able to be deactivated with simple wire cutting. This makes it a must-have for any driver who wants to protect their vehicle.