• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your valuable property from theft. This system is discreet & doesn't require additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This will then authorize the startup of your vehicle.

Simple PIN code Change Process

With the increasing rate of vehicle theft, many owners are seeking to improve their security. There are a variety of aftermarket security devices available from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system may assist you in locating your vehicle if it's stolen, but it will not stop the crime. An immobiliser, on the other hand does exactly what it says on the tin: it disables the engine of your vehicle to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves to steal your vehicle.

The ghost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to start. This can be done via the indicator stalk or window buttons. In addition to this it is possible to use a mobile app which can function as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This is an excellent option when you wish to donate your car ghost immobiliser to valet parking or maintenance. The immobiliser remains active.

The Ghost is an innovative and unique device that operates with the buttons on your vehicle rather than as a standalone device. This means it's not just a powerful deterrent against vehicle theft but can also be transferred to any future vehicles you own, making it much more of an investment than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a high-tech security device that shields your vehicle from key hacking and cloning. It also blocks ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus, which disables the engine. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices, which are a common method used by car thieves to bypass immobilisers.

The advantage of CAN data over conventional systems is that they work silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, centre console, or door panels, to create a unique disarming sequence. The sequence can be extended by 20 or more presses for extra security. The iPhone app allows a single, authorised connection using the pairing code unique to the Ghost and communication between the two is encrypted.

The Ghost also prevents thieves from stealing the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to run only if the correct pin code is entered. It is also possible to put it into valet/service mode for a temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service for servicing without the need to enter a PIN.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts signals to prevent your car from operating normally until you enter a customized code. The system can be activated or deactivated using your own smartphone app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is built into the key. It transmits a message to the ECU. If the correct code is sent, the car will start however if the transponder is swapped with one from another vehicle the immobiliser won't recognize it. This allows the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology developed the ghost vehicle immobiliser immobiliser. It protects you from hacking or key cloning and even key theft. The only way thieves could steal your car is physically towing it away and even then, they would not be allowed to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an individual PIN code that is changeable that needs to be entered before you can drive. This is done without extra hardware, such as keys fobs. It can take up to 20 presses. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals, which means thieves cannot utilize sophisticated RF scanning or code grabbing technology to detect that security systems have been installed.

Unlike physical anti-theft devices like clamps or wheel locks, ghost car immobiliser is hidden within the vehicle, so it cannot be removed or disabled by thieves and is also harder to remove from a car alarm which requires disarming using a button sequence. This makes it a fantastic addition to a GPS tracking device, which can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You don't need to look far on social media to see stories or even videos of vehicles that have been stolen by thieves using the most advanced technology tools available to them. This includes key-cloning devices as well as hacking tools that allow them to start the vehicle with your original keys.

Our ghost Immobiliser problems (http://italianculture.net) immobiliser fights this issue and offers an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It creates a unique pin code sequence that is triggered by your buttons on the steering wheel, door panel and the centre console. This unique PIN has to be entered along with your original key fob to stop the vehicle from beginning. The unique override pin can be found on a black card which you will receive following the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals. Therefore, it cannot be detected by diagnostic software that can determine the security system you have installed. This makes it a great alternative to a tracking device.

Contrary to other security systems which use a relay in engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker with these systems but this must be stated prior to the installation of the device. They are also compatible with valet/service modes and a great alternative to a tracker device when you take your car to the dealer for an electrical issue.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles being stolen without the owners keys. With the ease of access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your prized possessions. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys were cloned or your vehicle has been stolen.

It directly communicates with your car's ECU (Engine Control Unit) via the data loop called CAN. It's completely quiet since it doesn't utilize radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of a new key or replacing the ECU to bypass the system as only the correct PIN code can allow the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, center console, and door panels. Before you can begin your car, you need to enter a unique and reversible PIN code up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser for the market that is being developed. It will prevent your vehicle from being started or driven when you don't enter a PIN code first. If the device is armed and you try to drive away, it will display a warning on your dash which will flash continuously for about 300m. If you enter your PIN code at this point it will disable the anti-hijack device and your car will continue to operate as normal. If you don't enter your PIN in this moment, the indicator will continue to flash and require a new PIN each time you attempt to start your vehicle.