• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons to Change Door Lock

There are a variety of reasons to change your door lock, from upgrading your home's security, to redecorating your entryway. You may need to change locks if your key gets stuck or becomes difficult to turn.

DIY novices can easily modify their lock. Begin by gathering the materials you need.

Remove the old lock

Before installing a new lock, it is essential to remove the old one from the door. This is important when you suspect that someone else might have access to the home. It's also a good idea after you've moved into a new home, experienced a burglary or welcomed a roommate. It is easier than you think and can be done in a matter of minutes.

Begin by removing the screws that hold the deadbolt faceplate onto the frame of the door. You'll need to take off the screws on both sides of the door in order to remove the faceplate. This will let you see what is behind it and will give you a better understanding of how to proceed in the next steps.

After removing the faceplate you'll need to take off the bolt along with the strike plate and strike plate. Use a screwdriver to loosen the bolt and take it out of the hole in the door. If the bolt is rusted you may need to use a chisel to hit it. If you are using a chisel be cautious not to scratch the door frame.

Before you take down the old lock, be sure that your new deadbolt and doorknob will fit into the existing holes in the door. The majority of hardware stores and big box stores carry various types of locks. They can assist you in choosing the best one for your needs. If the lock you bought doesn't match your door, bring it back and ask for help.

Find small depressions or notches inside the handle and around the trim while you take off the lock. If you can find them, insert a straightened safety pin or a flat screwdriver into them to release the handle and expose the screws beneath.

Once the screw inside the handle is removed, you can now begin to remove the knob from its spindle. To do this find the set screw at the base of the knob and loosen it. The next step is to remove the knob from the spindle. Finally, carefully remove the spindle from the door.

Install the new lock

It's a good idea to change the locks on the doors of your home on a regular basis, particularly in the event of a burglary or you move into a room with roommates. Change the lock is an affordable, simple and effective method to ensure that your home is secure. Most people can do this yourself with a screwdriver and some basic instructions. You might also want to learn how you can change the lock's key to ensure that only you have the key.

To start the process, you need to buy an additional lock that matches the keyway of your current lock. Most locksmiths will rekey your lock for you at an additional cost however, you can save money by doing it yourself. You can purchase the new lock at a hardware store or online. A standard deadbolt should be able to fit on doors of all sizes however, you'll need to measure the area on your door to ensure that it fits.

Most times the lock you purchase will include an image of a cardboard model that shows you how it will fit on the door. You can use this as a reference when drilling the hole which is a lot easier than measuring every time. If the template does not line to the hole you intend to drill you need to take it back to the hardware store and purchase another one.

When you install the new lock, remember to put it on the right side of the door. Check the latch. It should have a label that reads "up" or something similar. Make sure the latch is seated correctly in the latch plate, then secure it using the screws supplied.

If you are replacing the knob lock on your door, it's also important to be aware of the way it's operated. Most knob locks are left-handed, however there are a few that are right-handed. If you are not paying attention, the knob could be placed on the wrong side of your door, which will prevent it from being locked from the inside or outside.

When you're done testing the new lock to confirm that it functions. You should be able both to lock and unlock the door with keys from the inside as well as from the outside. If you are not satisfied with the results you can contact a locksmith to repair window locks the issue.

Test the lock

A lock that does not open can be a hassle however, it could also put your family's safety at risk. It's a good thing that it's simple to fix the majority of issues with door locks by performing a bit of troubleshooting and lubrication. Make sure that the key is properly cut, and that the lock assembly is not dirty or loose. If this doesn't solve the issue Try lubricating the door lock actuator using powdered graphite.

Ensure that the doorlock switch, wiring harnesses and actuator connector all work properly. Refer to the wiring diagram or manual to determine the color code and function of the wires for each door lock switch. Use a digital meter or test light to check if the actuator is receiving power and ground whenever the switches are turned on. If you see voltage switches that toggle with each other this means that the switches are in good condition and the actuator will require replacement.

If the switch seems to work however the actuator does not move when you turn the knob, it could be an issue with the actuator cylinder itself. The actuator cylinder has spring-loaded pins that stop the cylinder from turning until the key is placed in and moves the pins upwards to accommodate the key's height in the location. This causes the cylinder eventually to rotate opening the lock body, allowing the handle latch.

If the door lock actuator is still not working, you can take it off it with a small screwdriver. You'll need to loosen the locking bolt first and then remove the plastic cover that houses the electrical connector. Then disconnect the door lock actuator and let it drop down. You should then be able find the two bolts in 10mm that keep the actuator in place and then remove them. Once the actuator is removed, you'll be capable of disconnecting the black electrical connector and then pull it out along with the actuator and lock assembly.

Replace the key

If your deadbolt is locked or door knob isn't functioning, you'll have to reset it or replace it. This is not difficult and could save you money. It is best to hire a professional locksmith check the locks for any issues prior to starting. This will give you peace of heart that your home is secure and safe.

Remove the exterior faceplate of the doorknob/deadbolt. If there are screws that hold the faceplate Use a screwdriver to take it off. Then, remove the interior faceplate using a screwdriver that has a flat head. After removing the faceplate you can take the bolt and screw from the lock cylinder.

A locksmith can assist you determine if the lock you have is in need of replacement Window locks or rekeyed. They can also give you advice on the best security options for your home. They can also make necessary modifications to your door and frame to ensure the perfect fit. They also provide a warranty on their work.

You will need to purchase a brand new lock key before you can rekey it. It's important to use the correct key in the upvc window lock repairs. A key that's not the right size can damage the internal mechanism of a lock and hinder it from working. Insert the key into the lock to verify its size. If the key sits completely against the plug then it is the right size. If the pins extend out from the top of the plug, they're not long.

There are many reasons you may want to change your door lock, including:

Rekeying a lock can be an option that is less expensive than replacing one if you are moving into the home of an owner who has passed away or if keys have gone missing. It's also less invasive than a complete replacement. Rekeying an existing double glazing window lock replacement might not be possible in certain situations. If the lock has been damaged or repeatedly jammed, as in it could be time to replace it.