• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum and timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double glazed window repairs near me-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window repair near me frame.

If you're planning to try to remove the window repairs near me panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth instead of landing on the floor where they can be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, with time, they are susceptible to a range of issues, including sagging. A sagging window can cause problems with light, draughts and even security. It's important to take action as soon as you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows so you can access the frame. With the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. It is crucial to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close the window and perform a test fit. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

It is important to act if you wake up every morning to find mouldy walls and floors that are wet. Water leaks from windows can not only cause destruction of your home's structure but also hamper your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how serious the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with a breeze it could be hinges that are at fault. They can be replaced by any competent DIYer and can be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's easier if you have someone to help hold the frame up.

Verify that the uPVC hinges are open and closed in the proper direction. You can do this by checking for the arrows on each hinge. This indicates which way the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation at the factory. Sending us a picture via our website will often solve the issue. We are happy to give assistance.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also lower the risk of a window repairs near me sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. The hinges can also be misaligned due to wear, creating a gap where the sash meets frame. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. Second, the interlock can be unbalanced. It is located on the hinge's side and could require to be cleaned. In certain instances it might be necessary to replace these.

The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will provide a great level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach the point when it's more economical to replace them than fix them. If you encounter any issues with your window repairs near me made of upvc, it's best to consult a professional immediately.