• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Locks

It isn't easy to change your door lock. It is crucial to secure your home from intruders, and to change locks when you move in with a new housemate or let out your home.

The majority of modern locks are designed to fit standard door widths. If your door is thicker you'll need a "thick-door" kit with longer screws and longer tail pieces for deadbolts.

Remove the old lock

You will need to remove your old door lock from the door before you install the new one. You can do this using a few simple tools, but you must be careful not to scratch your door frame or door. Using the right tools will save you money on future repairs.

Start by removing the screws that hold the handle and trim. This can be accomplished using a screwdriver. After the screws have been removed, you can take off the trim. Then, you can remove the screw that binds the handle and trim to the door. After removing screw then, you can take off lock cylinder and open handle.

One of the most frequent indications that your lock is going bad is when you can no longer move the key inside. This is because the tumblers wear out and eventually stopping their movement up or downward, causing the lock to stop working. If this happens, you'll need to bring the lock to a locksmith for it to be rekeyed.

Begin by removing the screws that hold the faceplate in place. If the kit you purchased does not include new screws, then you can purchase them from a hardware shop. If you're installing a mortise lock, you must also take out the screws that secure the external rose plate to the door. After you've removed the screws, remove the dead bolt and the plate away from the door.

Then, search for a pinhole on the interior handle trim. If you spot a pinhole then insert a straightened safety-pin into it. You can also try a flat screwdriver against a depression or slot. This should loosen the handle and reveal screws which can be removed to remove the entire lock case from the door.

Installing the new lock

If you're looking to replace your lock after a break-in or simply want to change the appearance of your door installing a new lock is relatively easy. It is crucial to measure your door prior to purchasing a lock to ensure that it is suitable. This is especially important for deadbolt locks, as they have to be of a certain size to fit inside the bolt pocket and strike plate. Contact your local hardware store for advice in case you don't know how to measure.

If you are replacing a mortice, you can use the existing centrerail as a reference to place the new mortise. Once you've determined the location of the lock, drill holes on the centre line that are the same size as your lock. Then, chisel the wood until you've got a rectangular space to fit your mortice lock. Install the lock and then outline the faceplate using the marking blade. Mark and drill holes for screws to secure the faceplate in the correct position.

If you want to rekey locks, you can save money by purchasing a starter kit that includes keys that can be re-keyed and a blank key. Kits can be purchased at a variety of online stores as well as hardware and home improvement stores. These kits also come with instructions to help you complete your task.

If you're renting, be sure to check your lease agreement before changing locks. You might be required to give your landlord the key to the new locks. If this is the case, you could be required to dismantle the old lock and replace it with a new lock. You can buy a basic lock at the hardware store near you or you can purchase an advanced lock that is connected to your home's WiFI and allows you to lock and unlock your door remotely. Schlage Smart Lock is compatible with all knobs and levers. The system can be linked to an intelligent home security hub to allow you to receive alerts whenever your door is unlocked or opened.

Installing the new lock

A broken lock is an enigma for security, which is why it's important to replace it quickly. Luckily, replacing the door lock is a simple and quick project that anyone can do. The first step is to take the old lock from the door. The screws holding it in place are unscrewed and the lock is pulled out. Depending on the kind of lock you have, you might need an Allen wrench or screwdriver. Once you have removed the lock you have been using keep all parts and store them in a safe location.

Next, install the new lock on the door. The majority of kits include a cardboard template that shows how the lock will fit on the door. If the template doesn't line up with your door, you can trace it using a pencil or use a chisel remove extra material. Make sure the interior latch plate is aligned with the mortise hole once the new lock is installed.

Be careful not to overtighten the lock while installing it. This can cause the lock to rattle or even break. If you have a lock keyed, ensure that the spindle is in alignment with the hole on the knob. If it's not, use the screwdriver to push through the lock into the knob.

Once you have finished installing the new lock, it is now time to install the base plate that is included with it. If the lock isn't equipped with a base plate that is decorative, you can buy one that matches the hardware.

Test the new lock to confirm that it functions. You can do this by inserting the key into the lock and turning it to make sure that it is able to open. If it fails, you should consider contacting a locksmith.

Rekeying your locks by a professional can also help prevent break-ins. This process involves changing the internal lock tumblers so that it will not accept your old keys. This will ensure that your home is secure and will give you peace of mind.

Test the new lock

When you are installing a new lock you must ensure that it operates as intended. It is crucial to follow the directions. You may not be able to unlock your door if you don't. You can call the locksmith for help if you are unsure of what to do. A locksmith can give you guidance on the most suitable locks for your home.

If you have trouble opening your lock, it might be a problem with the handle or latch. You can lubricate the latch with graphite or spray it with WD-40. This can fix the problem. You may need to replace the latch if the latch is not working properly.

The lock could have been installed incorrectly. The inner door handle clip may be damaged or missing from the new repair window lock. In this instance it is recommended to remove the handle from the inside and insert a plastic retainer clip. The handle will then be linked to the repair upvc window lock upvc window locks repair replacement lock [my explanation] and the lock will be tested.

After you've replaced the lock it's crucial to check the keypad to make sure that it's functioning correctly. You can test it by inserting the key inside and turning it. If the keypad works correctly, your door will be able to unlock and lock.

You should also check the deadbolt lock to see whether it's working properly. If it's not working, remove the latch on the door and undo the Phillips-head screws. Take out the old deadbolt and replace it with the new one. Place the deadbolt in the proper direction and load the lock in the correct way.

Another method of testing the new lock is to use the spindle test. This can be performed by inserting the spindle with a screwdriver. This test should be conducted prior to reinstalling the lock to avoid any mistakes.