• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace and will usually fit into the frames of the past easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this case you'll need to find some plastic spacers that will assist the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you start working on the glass so that any shards will fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your Upvc Window Repair window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, close your window and test it for fit. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in position.

If you can't reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need close the window and then perform a test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if you get up each morning to find mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how serious the problem is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes are free of debris in them and that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repair near me windows are brittle to open, or slack and open with ease It could be hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung upvc window repairs near me windows that are hinged and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is an easy process but it can be simpler when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The issue could be caused either by opening the window improperly or due to a poor installation at the factory. Sending us a photo via our website is often enough to solve the issue. We are always happy to provide advice.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more smoothly. It can also reduce the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also become misaligned due to wear, causing gaps between the frame and sash. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it could be necessary to have them realigned or replaced. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder. These are usually fabric tubes which are filled with a sort of filler and can be placed on top of your windowsill. These will keep your home warm by blocking cold air.

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it could be cheaper to replace them instead of fixing them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as you can.