• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. However If windows with double panes are secured by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your home until a professional comes out to repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is large, you might need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. Then, remove both the hinges at the top and upvc repair bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and safe from drafts.

UPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking may need to be removed before a new layer of caulk can be applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This can make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you may need to think about replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

It is also important to remember that if the leak originates from the glass in your double glazing glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with a breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung upvc repair windows that are hinged and, like all mechanical parts, they will wear out over time. It is very easy to change a window hinge however it is easier if someone helps hold the frame.

Check that the uPVC hinges open and close in the right direction. You can do this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem can be caused by opening the window incorrectly or by a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to provide assistance.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also be unbalanced due to wear, creating gaps between the frame and sash. If they're beyond repair, it could be required to realign them. The second is the interlock, which is located on the hinge of the window and uPVC repair can be misaligned. Again, it is feasible to give them a clean but in some instances it could be necessary to get them replaced.

The next common cause of draughts is the window seals. They can become worn down or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as possible.