• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However If windows with double panes are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will stop drafts and water from entering your property until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you might think about a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of problems including sagging. A sagging window can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

It is a fairly easy fix that can be completed by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes are free of debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more extreme instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with ease It could be hinges at fault. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges are open and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window repair should be opened.

The problem can be caused either by opening the window improperly or a faulty installation in the factory. This issue can be fixed by sending us a photo on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It also decreases the possibility of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, may become displaced, which causes an opening to appear between the sash and the frame. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it might be necessary to have them aligned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases, Window Repairs it may be necessary to replace these.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder. These are typically made of fabric which are filled with a sort of filler and can be positioned on top of your windowsill. They can keep your home warm by blocking cold air.

Your upvc windows can continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them rather than repair them. If you encounter any issues with your Upvc window, it's best to consult an expert as soon as possible.