• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Regularly inspect the window sashes for any damage, mildew and mold. You can avoid the cost of repairs in the future by catching the issues early on before they become out of control.

The sash is an internal frame that is able to move up and down vertically in windows that open. This article will demonstrate how to do a variety of simple sash repair.

Weather Stripping

Wooden window repair sashes are a great way to add an elegant appearance to your home. They are also sturdy and last for a long time provided they are properly maintained. However, they can be damaged or degraded over time, due to exposure and normal wear. However, sash repair experts can restore your windows back to their original condition and keep them looking great for longer than replacement windows.

The first step to sash window repairs is addressing weather stripping. It's found on both the sash as well as the frame. If it's damaged or worn out, it can cause drafts and other problems. Begin by identifying the brand of window and the glass manufacturer's date (etched on the glass's corner or the aluminum spacers between panes). Then, take the sash off and mark its height and width so that you can locate replacement weather stripping to match.

Then, take the sash from its holder and place it on an even surface that allows you to access all four sides. If your sash has a double-hung, you'll have to remove the weights and the ropes that go with them that should have fallen into the intended pocket in the jamb liner. After you've removed the sash, use a utility knife to cut away the weather stripping that was formerly in place at the corners, and then remove it manually or using a putty knife.

When the sash is clean, you can replace the parting stops. These are long pieces of wood that separate the two sashes. Pam likes to replace these with standard 1/2-inch-by 3/4-inch window repairs near me trim from the lumberyard. However, you could also use a piece of scrap wood.

After removing the parting stops and trimming them to the desired length then apply a thin layer of glazing compound on the bottom of the sash. Smooth it out using your putty knife, and then let it dry for at least a few days. Once it's fully cured, apply a top coat of acrylic latex paint. This will protect the putty, and give your sash an updated look.

Sash Hardware

The hardware that holds window sashes is prone to wearing out from time and usage and the result could be a upvc window repairs or door that won't open or close easily. The good news is that repairing and replacing this hardware is typically relatively easy and affordable. If you're having difficulty opening a sash, spray some lubricant into the jamb channel. Then, you can slide the sash up and open to see if it resolves the problem. If the issue continues, it is most likely that the sash balance is off. It is necessary to take off the window sash to get access to this part of the hardware.

Ideally, upvc window repairs near me sashes must swing open and closed with minimal effort but this is difficult when the weights wear out or if the sash meeting rail isn't properly glazed. This issue could be caused by a variety of things, such as lack of maintenance or by the wrong weight rating for the specific window sash.

If the hinge arms of a window are beginning to slide, this could cause the sash to drag and eventually hit the frame in the corner that's in the opposite direction of the hinge arm (Photo 1). To address this issue, first make sure the sash is firmly seated in the opening of the frame and then take it out of the window. If the sash is fixed to the hinge arm, unbolt the hinge and replace it. (Photo 2). Install the new sash (Photo 3).

Windows that are old, especially in older homes, can be difficult to close and open due to hinges that are sagging and general inefficiency. Many times just a few easy fixes can allow these windows to operate smoothly and help homeowners save money on energy bills.

To make these repairs to sash, it's important to have all of the necessary tools lined up before you begin. Mark the location of the hinge channel on the frame (Photo 1) using pencil. This will help you to place the channel in the right position after you've finished. Remove the sash, and then remove the hardware, including the parting beads (Photo 2) and the chains or cords that hold it in place. Soften any hardened putty with an electric heat gun set to medium and fitted with an shield for the nozzle. Take off the old sash and put it in a labelled bag.

Sash Weights

Sash weights can be replaced to enhance the efficiency of your window sash, and also reduce energy costs. Sash weights are heavy lead or iron cylinders, which are enclosed in a hidden cavity and connected to the movable the sash with rope. They are counterbalancers which allows the window to be closed and opened without the need for mechanical or electrical devices. If they fail, sashweights tend to be neglected or not used by homeowners.

A weight from a sash that fell out of the cavity is difficult to recover, so you will want to locate a new one that fits correctly. You will also need an additional piece of string, a length sash cord and some sash pulleys to tie the new sash weights onto the sash cord.

Mortise and Tenon joints can be used to join windows made of older wood. The wood pegs that keep the parts together can be removed by a pin punch and hammer. The majority of these pegs are large on one side, and smaller on the other. It is important to first remove the smaller diameter sides. Later sashes used glue instead of pins. They can be cut by using a knife or a mallet.

After the sash is removed, you can take off the stops on the sash and get access to the weight pockets. This is usually done via a small hole at the bottom of each jamb. The hole is then covered with the wooden panel which can be removed to reveal the inside workings.

When the sash has been shut off and the access panel has been removed, you are able to remove the old weight and replace it. Be sure to weigh the sash prior to you do this, since the old weights could be different in size from what you require. After the new weight has been installed, run the string through the sash pulling mechanism. Then, attach the string to the boxed frame. Leave a few inches protruding at the top of the string to allow for future adjustments.

Sash Cords

In the majority of double-hung windows, a cord or chain is affixed to the weights. This supports and keeps the sashes within the jamb in a balanced manner. Over time, these chains may become damaged and make it difficult to raise the windows. A new sash cord can restore the ability to move the sash upwards and downwards and hold it in place when it is opened.

The first step to replace sash cords is to locate and remove the access panels in the jambs. They are typically screwed or nailed in and require removal. You might be able to employ a hammer and chisel to remove them, but it's always better to lay down dust sheets before starting any work.

After you have removed the access panel, you are able to begin working on the sash. Make the small parting beads (also called "tie rails") out of their grooves using the chisel or flat bar. They are typically wedged into or nailed, but they can be removed which is why it's worth your time here. If the sash is still in place, pry out the mortise and tenon joints using pin punch and hammer or screwdriver, then unhook the wood pegs on the components. You should be able to move the sash back and forth without difficulty, though it may require lubrication if it feels stiff.

With the sash open Take a measurement of the sash chain to extend from the pulley in the top of the jamb to the sash slot in the bottom. Cut the chain or cord and then attach it as described in the step 6 above. You can employ a hammer, screws or nails, however nails are less likely to cause damage.

It's best to leave the original weights in place unless you've purchased a kit to replace the old counterbalance. They're not expensive and simple to install if you purchase them from architectural salvage stores. Depending on the size of your window, one or two sash weights could be needed to keep it open.