• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

Over time the handles on your doors will get worn out and need to be changed. When replacing them, it is essential that the new handles match the exact dimensions of the previous handle.

The top screw's location the lever, and the keyhole sizes are the three measurements that you need to verify. Use the size guide to aid you.

Inline Lever/Lever

A lever handle or lever is a modern-day door handles victorian handle that is designed to fit new or replacement doors. This style of handle is available in many styles and finishes. This handle is available from a number of manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of robust materials and are perfect for multi-point lock doors that require a strong design. The handles are inline, and they utilize the same spindle and screws to secure them. They are easily fitted on any uPVC/Composite door.

The handle can be placed and angled to suit any user. The handle has been tested to 200,000 cycles, this helps to ensure the quality of the finish and performance of the handle over time. The lever that is sprung can be shortened to fit the widest range of locks. This is useful for doors with narrower openings where the cylinder is situated further away from the door. A shortened lever is also a good choice for doors where the latch could be activated by the thumb turn located on the inside.

Lever Pad

The lever pad upvc handle is different from the lever handles that are used on the majority of doors. These handle types can either use a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are commonly utilized on UPVC doors with double glazing. They come in a variety of finishes & variations.

The handles are available in a variety of finishes including White, Chrome and Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All UPVC handle lever pads come with a spindle, screws and can be installed on a uPVC door. The backplate fixation centers of 211mm permit a larger handle, which is usually a benefit when replacing an old or damaged multi-point door lock mechanism. The levers for these handles have springs, which can solve the issue of door handles that move out of the horizontal position when not being used.

When selecting a replacement UPVC handle and spindle, it is crucial to match the dimensions of the PZ on both the multipoint lock and the uPVC door. This measurement is also referred to as the 'handle centre' or 'cylinder centres' and is a critical aspect of matching up the right handles.

Once you have the proper PZ size you will then have to ensure that the handle lever pads and push pads are in a suitable shape to fit the American with Disabilities Act (ADA) compliant handles that you need for your doors. These are usually square or round with an internal lever, and an external push pad.

The majority of UPVC Lever Pads we sell are spring-loaded. This means they return to a horizontal position after they are not in use instead of hanging, and possibly sticking in the frame. This keeps draughts out of the building. The majority of upvc sliding door handle lever pad handles come in both left and right handed versions, allowing them to be put on either side of the doors.

Euro Cylinder

Cylinder locks can be found on uPVC and other kinds of doors. They work by using a key to unlock a cylinder case which is then revealed with pins that can be aligned with those inside the lock body, allowing them to turn an revolving cam, opening the door. Euro cylinders can be equipped with up to six pins with both internal and external doors generally having different levels of security.

Choosing the right cylinder is vitally important; this is contingent on how your doors and handles are used. External doors, for example should be equipped with cylinders with greater security and doors inside can be secured with an ordinary cylinder. Additionally, certain cylinders come with additional features that can improve security, for instance anti-drill and anti-bump characteristics.

To make sure that the euro cylinder is the right size for your door, it must be measured correctly. The cylinder must be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn if there is one. If you cannot measure using the lock in a fixed position, you can take it out of it. It is crucial to not have a extension of the cylinder beyond the handle or escutcheon. This could make it susceptible to lock snapping attacks.

The design of the latest cylinders includes anti-drilling and bump resistance features. They are designed to decrease the risk of attack by forcing the cylinder rotate in an opposite direction. This will help to deflect attacks and protect your door.

There are also cylinders constructed to withstand snapping. This is a common attack on cylinders. A special tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is much quicker and easier to achieve than opening the door with multipoint locks and leaves little evidence of a burglary, which could hinder an insurance claim.

Spring Cassette

This spring cassette is located inside the base plate of your door handle. It is a spring-loaded solution to bring your multipoint lock handles to their normal position after using. Previously a lot of these types of handle didn't have a spring built into them and without this they tend to droop or drop when the window locking handles mechanism is disengaged. This component is the most effective way to address this issue. It also helps prevent your upvc door from becoming stuck in either the closed or open position as they are difficult to close manually.

These spring cassettes were designed to be used with sprung multipoint lock. They will not fit handles that aren't sprung, and you will have to cut a hole in your backplate in order for them to fit. (Please check the image for a detailed diagram). They are a replacement for existing damaged or missing cassettes inside the door handle backplate of many brands of uPVC doors. They are available as a single unit. They have a square-cut out that is able to accommodate an 8mm shaft.

These spring cassettes offer a great value solution to the issue of sagging door handles. They are simple to install and will extend the lifespan of your uPVC doors. For more information about our selection of uPVC accessories and spares, please feel free to get in contact with our team. We are available to help and happy to offer expert advice.