• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazing Door Locks

Many homeowners opt for double glazed doors and windows to increase insulation, energy efficiency and sound reduction. But, they also serve as an effective deterrent for burglars.

Verify that your double-glazed windows have anti-jemmy hinges to enhance their security. These hardware parts are specially designed to make it very difficult to get the sashes of your windows open.

Multi-point locking

Multipoint door locks are one of the most effective security devices that you can install at your workplace or at home. They are nearly impossible to pick or break and are an ideal option to add to any security system. They also can improve your energy efficiency, by reducing drafts around the doorframe and enhancing the seal.

Multi-point locking systems consist of a deadbolt, a live bolt and hook bolts that are above and below the latch. They also include flush bolts which lock into the head of the door and the sill. They are usually extended across the entire width of the door at least. In commercial situations, they are called "full-width" systems because they protect the entire opening.

Multi-point locking is offered on most uPVC and certain timber doors. This kind of lock provides an increased level of security than regular locks and is often be specified as part of an approved by the police Secured by Design initiative for new homes.

When a multi-point upvc window lock replacement lock door is shut and the outside handle is turned on, it opens the latch bolt. The inside handle can be locked by turning the thumbturn inside when the door handle is raised or using the lock key. You should always use a key to lock your door once it's closed. Attempting to push the deadbolt or latch bolt with a handle may damage the lock as well as the hinges.

If your uPVC multi-point lock doesn't function properly it could be due to it's not aligned with the frame of the door. You can check this by placing a spirit level on the top of the door and observing any gaps in the miter joints at the point where the frame is joined to the door.

It's worth asking your double glazing expert whether there's a gap and how to fix it. They'll be able replace the lock on your behalf or install a replacement. They will be able tell if it's caused by damage on the frame or the lock unit. In these cases, the technician will be able to repair or replace the multipoint lock to restore it's functionality.

Espagnolette locks

Espagnolette locks have become a standard locking mechanism for double-glazed uPVC windows. They can be identified by their flat strip shape that rotates when you turn the handle. They work in harmony with the secure multi-point locks that are positioned around the frame to firmly lock and release your windows. If you are looking to improve your uPVC windows, espagnolette handles are an ideal option for new builds or renovations. They are available in a broad range of styles, including period and contemporary. They also have a wide variety of bar sizes and backset options, as well as mushrooms cam heights, and a choice of profiles to suit any application.

The lock with a slat is a popular choice, but it's been criticized for providing the lowest level of security on French doors. The single point of locking in the middle of the door could be overcome with enough force. It is also quite easy for burglars to open your French doors by bending the handle to move to the left or right. These doors are typically the main entry points into your home, and they should be secured to reduce the chance of intrusion from outside.

In spite of their name, espagnolette locks aren't bolts they are actually a one-piece mechanism that fits externally onto the outside of your French doors or internally on the frame of a casement window lock repair. The mechanism operates with the help of a handle. It is made up of a rod that has hooks at its sill and head. The hooks are inserted into sockets on the frame of your Window Lock Replacements. When the handle is operated, the rod is moved up and down and the hooks are locked into their receivers to lock and unlock your windows.

They are a great option for those who want to improve the security of their French doors without compromising the aesthetics of the door or the overall design of the room. These handles can be utilized in different styles and can be master-keyed for extra peace of mind.

Like cockspur handles, espagnolette handle are available in both inline and crank models based on the orientation of your windows. Inline versions rotate in the same direction as the original. Cranked versions are available in both right- and left-handed versions.

Laminated glass

Laminated glass is often used for windows since it is extremely hard to break. It is also much safer than normal glass because it is a single piece of safety glass rather than breaking into sharp, loose fragments. This makes it ideal for residential and commercial buildings.

Lamination is a method that is the process of combining two pieces of glass with a plastic layer in between. The entire piece is heated before being press-pressed to create a strong enough to use as windows or doors. The laminated glass that results is five times stronger and 100 times more stiff than tempered. It is also able to withstand more intense impacts, and withstand weathering.

This kind of glass is ideal for buildings that need to perform well, such as enhanced safety (impact-resistant glass) and UV protection or noise reduction. Laminated glass can be paired with high-performance coatings to improve both thermal insulation and solar control. It is available in a variety of options to suit your project and budget.

Laminated glass is safer to use than tempered glass because it can be cut after the fact. It is also less likely to break when cut from the side instead of the edge of the glass. This makes it a great option for glass that cannot open or close, such as cellar windows.

It can also be used to reduce the sound that is transmitted through high-rise structures. The Saflex PVB interlayer in the laminated glass is also able to block some of the sun's damaging UV rays, preventing discolouration of furniture and fabrics.

Although laminated glass is more expensive than tempered glass, it has many benefits that will save you money over time. It's also more robust and resistant to abrasions and scratches. It can be made to meet your specific specifications. It is also less susceptible to heat damage, making it an ideal option for coastal areas and high-rise buildings. Certain building codes also require that exterior doors and some windows inside are made of glass laminated.

Friction hinges

Friction hinges are used to support and keep doors as well as flaps and panels. They can also resist the motion of other hinges and stop an unintentional opening and closing. They are available in different shapes and sizes. They also be fitted with different torque levels which are the forces that determine how long the hinges remain open or closed.

Aluminum is a great material for friction hinges due to its durability, corrosion resistance and high strength-to-weight ratio. It is also lightweight and easy to work with. It can also be made into a variety of finishes, and is simple to install and repair window locks. Another popular material for friction hinges is brass. Brass is an alloy of copper and zinc which has a natural resistance to corrosion. It is more durable and stronger durable than stainless steel, however it is more expensive.

The hinges made of friction used in uPVC door systems with double glazing are able to be customized according to the application. These customizations may include the amount of damping, the viscosity of the lubricant, the degree of tolerance to space between components, as well as the conditions in which the hinge is used. These factors can affect the dynamic torque of hinges. It is crucial to monitor the metric in critical applications.

There are various kinds of friction hinges including one-way and detent. Detent friction hinges don't have torque in the reverse direction. Other variations include curl, disc and pipe friction. Every type of friction hinge has its own set of characteristics that make it more or less efficient for specific uses.

The friction hinges are often called 'free stop' hinges, because they permit a lid or door to remain at a fixed angle after the force has been removed. This prevents injuries through preventing accidental closures. This kind hinge is ideal for medical, rugged or dangerous areas. The hinges are configurable to have different degrees or free play, and can be designed to function in a variety of angles.